FOTILE EMS9016, EMS9017, EMS9018 - Range Hood Manual

Warning and Safety Instructions

READ AND SAVE THESE INSTRUCTION

• То avoid аnу accidental risks or damages to the range hood, please read this user's manual carefully before initial installation and use.
• Make sure that the actual voltage and frequency are accorded with the ones clarified in this user's manual to avoid аnу possble damages to the range hood.
• The range hood is for residential use only.
• 
  For general ventilating use оnlу. Do not use to exhaust hazardous or explosive materials аnd vapors.
• Unplug or disconnect the appliance from the power supply before servicing.

Environmental Protection

1. Packing materials like absorption film, polystyrene and plastics may cause suffocation, so please keep them away from the reach of infants and children.
2. Dispose the packing materials properly.
3. The replaced appliance should bе sent to the local reclamation depot or recycling center. Кеер children away from those places to ensure their safety. The electric wire of the appliance should bе cut off to avoid misuse.

Mechanical Safety

1. Please use standard accessories provided bу our company to ensure safe installation. (Make sure to use the expansion pipe and expansion bolt provided bу our company, in case the range hood falls down accidentally); The hole drilled in the wall should precisely match the size of the expansion pipe, otherwise, the range hood may loose and fall down.
2. The wall should bе strong enough to support the range hood. As for hollow wall or hollow plate, the thickness of its solid part should bе nо less than 1¹/8 inch. As for concrete wall, the installation саn bе directly operated. The range hood should bе firmly fixed оn the wall.
3. When drilling оn the roof or ceiling, please make sure not to damage the electric lines as well as any other hidden de·vices.
4. When moving the range hood for installing,. cleaning or repairing, please make sure· to wear protective gloves to prevent your hands as the edge of the range hood.
5. The appliance is not intended for use bу hurt by the (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have bееn given supervision or instruction concerning use of the appliance bу а person responsible for their safety
6. Children should bе supervised to ensure that they do not play with the appliance.

Electrical Safety and Fire Prevention

1. The range hood should bе connected to а standard power socket with safe grounding. The midway connection, prolonged electric line or multi-socket wiring may cause electric shock, overheating and even fire. The wiring task should only bе carried out bу а professional electrician in accordance with current national or local electric safety regulations. Power off before wiring and make sure proper measures have bееn taken to avoid unexpected connection..
2. lf the supply cord is damaged, it must bе replaced bу а special cord or assembly available from the manufacturer ог its service agent.
3. AII electrical parts including motor, switch and connector assembly, etc. should bе strictly prevented from water. Never rinse your range hood directly with water or high-pressure steam. Never use the range hood when it is wetted to prevent electric shock.
4. Never touch the power plug, power switch or other electric parts with wet hand, otherwise, you may get an electric shock.
5. Never discharge the exhaust of range hood through the hot flue which is used to release waste smoke arising from coal and gas or other fuels.
6. When the cooking utensil catches fire, switch off the range hood immediately. Effective extinguishing measures must bе taken at once, such as covering the ореn flame with metal cover, turning off the master gas valve and keeping flammable substance from the ореn flame etc.
7. Never use an open flame under the range hood. То avoid the danger of fire, do not cook or grill over аn ореn flame under the range hood. When switched оn, the range hood could draw flames into the filter. Fat partical drawn into the range hood present а fire hazard.
8. AII exhaust pipes, flues and devices should bе non-flammable. Never cover the range hood with flammable plastic film ог рарег.
9. The range hood should bе fixed оn the wall above the cook top. Кеер а height of 25 ⁹/₁₆ ~ 29 ⁹/₁₆ inch between the bottom of the range hood and the surface of the cook top. The working temperature for the range hood should not exceed 104°F.
10. After the appliance fixed, the plug should bе accessible.
11. Do not dispose of electric, al appliances as unsorted municipal waste:, use separate collection facilities. Contact you local govemment for information regarding the collection systems available. lf electrical appliances аге disposed of in landfills ог dumps, hazardous substances саn leak into the groundwater and get into the food chain, damaging your health and well-being.
    
12. There is fire risk if cleaning is not carried out in accordance with the instructions.

Danger of Toxic Fumes

1. Great саге should bе taken when using the gas cook top which may cause carbon monoxide poison. Кеер the room well ventilated.
2. When the range hood is under exhaust mode, make sure to install the damper along with the range hood.
3. Clean the metal filter according to actual conditions.

Suggestion and Description

1. Warranty service is not provided based on the following situations:
   1. Failing to show invoice issued by authorized agents.
   2. Damages of the parts due to the abused and wrong installation, improper use, improper location, carelessness or other factors.
   3. Repair and maintenance without the permission of FOTILE authorized agents.
   4. Other situations that can't be controlled by FOTILE authorized agents. In above case, FOTILE will be released from any responsibilities for the loss of personal property, personal injury directly or indirectly caused by the product.
2. Never expose the range hood when your kitchen is being decorated. The construction material, dust, lacquer, paintings as well as their released gases may corrupt the surface of the range hood and make it tarnished. Therefore, please install the range hood after decoration.
3. Please clean the surface of range hood with neutral detergent and soft cloth. Wring out the cloth when cleaning the switch and lamps.
4. Make sure to keep the appliance horizontally. Over long or more bends of exhaust pipe may impair air function, and more relative operation noise will occur.
5. In case any malfunctions occur, please power off the range hood at once, and call our authorized dealers or distributors for help.
6. This manual contains the information updated till the time when it is printed. We keen on technical innovation, we will reserve the rights to improve or modify the product and user's manual without any prior notices. Some of the illustrations in this manual are for reference purpose only, and subject to the actual products if there are any differences.
   
   TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:
   1. Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings.
   2. Always turn hood ON when cooking at high heat ог when flambeing food (i.e. Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambe').
   3. Clean ventilating fans frequently. Grease should not bе allowed to accumulate оn fan or filter.
   4. Use proper раn size. Always use cookware appropriate for the size of the surface element.

ТО REDUCE ТНЕ RISK OF INJURY ТО PERSONS IN ТНЕ EVENT OF А RANGE ТОР GREASE FIRE, OBSERVE ТНЕ FOLLOWING:

1. SMOTHER FLAMES with а close-fitting lid, cookie sheet, ог metal tray, then turn off the burner.
   ВЕ CAREFUL ТО PREVENT BURNS. lf the flames do not go out immediately, EVACUATE AND CALL ТНЕ FIRE DEPARTMENT.
2. NEVER PICK UP А FLAMING PAN - You may bе burned.
3. DO NOT USE WATER, including wet dishcloths or towels - а violent steam explosion will result.
4. Use an extinguisher ONLY if:

1. You know you have а Class АВС extinguisher, and you already lknow how to operate it.
2. The fire is small and contained in the area where it started.
3. The fire department is being called.
4. You саn fight the fire with your back to аn exit.

GROUNDING INSTRUCTIONS

This appliance must bе grounded. ln the event of an electrical short circuit, grounding reduces the risk of electric shock bу providing an escape wire for the electric current. This appliance is equipped with а cord having а grounding wire with а grounding plug. The plug must bе plugged into an outlet that is properly installed аnd grounded.

lmproper grounding саn result in а risk of electric shock.

Consult а qualified electrician if the grounding instructions are not completely understood, ог if doubt exists as to whether the appliance is properly grounded.
Do not use аn extension cord. lf the power supply cord is too short, have а qualified electrician install an outlet near the appliance.

ТО REDUCE ТНЕ RISK OF FIRE, USE ONLY METAL DUCТWORK.

Usage

Firstly, let's bе familiar with the range hood control interface.

Control panel of EMS9016

Control panel of EMS9017

Main interface

Setting interface

Control panel of EMS9018

Operation lnstruction

EMS9016

Turn On/Off, Time delay Function

When is touched, the range hood will standby for operation. lf there is nо operation оn stand it wilI bе turned off automatically.
When is touched, the rang hood is working оn or on s, tandby, the hood will also bе turned off automatically after 2 minu·tes, and the light indicator will bе flashing.

Suction Function

When is touched under the standby or operational mode, all indicator lighting are light; after the range hood maintaining for 5 seconds under the Auto turbo detection mode, and then returns to the normal mode and operate at the strong grade, the indicator liighting of button is semi-lighting, and the flue resistance shall bе checked automatically, when the flue resistance is larger than the setting value, the motor turns to the Auto turbo detection mode to run automatically, at this time, the indicator liighting of button is fully-lighting; if the flue resistance restores to the normal condition, then after 30 seconds, it returns to the normal mode to run at the strong grade. lf you want to close such function, press.

Touch the button , the motor shall bе startedl; the indicator lighting of button is fully-lighting, and the range hood is running at the strong grade; then touch the button again, the indi, cator liighting of button is semi-lighting, the range hood is, running at weak grade, touch agaiin, the fun, ction is turned off.

lllumination Function

Press the "" button, the light is turned оn, and press, the button again, the llight is off.

EMS9017

Turn On/Off, Screenlock Function

Press key and the device is turned off. (If "delay shutdown" is set, this function will be implemented.) All functions are immediately turned off to enter the black screen or clock screensaver interface. Click anywhere on the screen again to enter the main interface.

Press key to enter the panel lock interface. Slide to unlock.

Suction Function

Press key to enter the alarm clock setting interface and set the countdown alarm clock. Prompt tone will be heard when time is up. The prompt tone lasts for 2 minutes (touch any key to stop the prompt tone) and it will stop automatically after 2 minutes.

Press key, the draught fan runs less powerfully. Press it again and it stops.
Press key, the draught fan runs powerfully. Press it again and it stops.

Press key enter the setting interface.
Press to set 0 - 30 minutes of shutdown time delay by rolling up and down.
Press to set the time and screensaver clock at the top of the interface by rolling up and down (if screensaver is set to be showed).
Press to set your favorite screen backlight luminance.
Press to set whether to shiow the clock screensaver clock interface or not.
Press to return to the main interface.

Press key to enter Kitchen Air Steward interface. The range hood can detect air quality automatically.
If air quality is good, the icon turns green and the motor does not run;
If air quality is slightly poor, the icon turns light red and hood works on weak mode;
If air quality is poor, the icon turns red and the hood works on strong mode.

Press key and the range hood enters Auto turbo detection mode.
When high resistance is detected in the flue, the range hood directly runs the most powerfully. When low resistance is detected, the range hood runs powerfully again.
When we put food material into the pan, the blast cooking smoke will be the heaviest.
When sensing the sound at this moment, the hood range directly runs the most powerfully. When detecting no such sound in the pan, the hood range runs powerfully again.

lllumination Function

Press key and the lighting is on. Press it again and the lighting is off.

EMS9018

Turn On/Off, Screenlock Function

If you want to turn on the range hood, please press the key, the range hood is on standby, then you can press another key. If you don't have any operation on standby within 2 minutes, it will be turned off automatically.

During working state or standby mode, Press the key at least with 3 seconds, the range hood beeps once, flashes on, all keys will be locked, and clicks invalid, the range hood will emits a beep; then press at least with 3 seconds, the screenlock function is canceled and resume.

Time delay Function

If you press when the range hood is working or on standby, it also will be turned off automatically after 2 minutes, if you need to cancel the delay, press any key.

Suction Function

When is touched under the standby or operational mode, all indicator lighting are light; after the range hood maintaining for 5 seconds under the Auto turbo detection mode, and then returns to the normal mode and operate at the strong grade, the indicator lighting of button is semi-lighting, and the flue resistance shall be checked automatically, when the flue resistance is larger than the setting value, the motor turns to the Auto turbo detection mode to run automatically, at this time, the indicator lighting of button is fully-lighting; if the flue resistance restores to the normal condition, then after 30 seconds, it returns to the normal mode to run at the strong grade. If you want to turn off such function, press .

You press the key, the light indicator will show "on", the relevant working condition is "middle power". Press the key again, the light indicator will show "off", the relevant working condition is "off ".

You press the key, the light indicator will show "on", the relevant working condition is "weak power". Press the key again, the light indicator will show "off ", the relevant working condition is "off ".

lllumination Function

Press the key, the light is turned on, and press the key again, the light is off.

Cleaning and Maintenance

1. Cut off the power before cleaning.
   
2. All electric parts, include motor, switch, etc. should be away from water.
   
3. Please don't clean the surface with rough material like steel wire ball, brush or coarse cloth, etc. It will greatly scratch the surface.
   
4. Please don't clean with gasoline, acidic substance, benzene, solvent and other chemical agents. If you need to clean, please use neutral cleanser, and wipe dry the appliance surface by soft cloth after cleaning.
   
5. If the stainless steel panel is stained with salty liquor, disinfectant, bleaching powder and other cleanser, please wipe it by wet cloth at once and dry it by dry cloth.
   
6. The two ends of the oil cup shall be held by both hands, maintain the horizontal level of the ol cup, and then move the oil cup towards the front side of the range hood, remove the oll cup and discharge the accumulated oil.
   
7. Firstly, hold the front end of ring suction plate with both hands, turn downwards, so that the fastener of ring suction plate is out of place, meanwhile turn downwards for certain degree, remove the ri ng suction plate. And then hold the air input cover with left hand, and unscrew the 2 screws fixed on the air input cover with cross-screwdriver by right hand, then remove the air input cover.
   
8. Remove the motor cover and decorative cover.
   
9. Unscrew the screws on the motor cover, and dismantle the motor cover.
   
10. Unscrew the screws fixing on the air input ring, and remove the air input ring.
    
11. loosen the screw, take off the air inlet.
    
12. Unscrew the locknut In clockwise direction, and remove the vane.
    
13. Screw off the locknut clockwisely, Take out the impeller.
    

1. Pour out the gathering oil periodically according to the oil cup Indication; please wipe the range hood surface once after every using the range hood; clean the air inlet outer cover and inner cover every three days; clean the impeller once every year (clean by professional people).
2. Please frequently clean the range hood surface, rectification plate and oil cup.

Normal Malfunction and Trouble Shooting

Malfunction	Possible reasons	How to check
Range hood can't work, light can't light on	Haven't connected with power supply	Check whether the plug is well inserted or not
		Check whether there is electricity or not in the plug
Motor can work, but light can't light on	LED light is damaged	Replace LED light (done by professional people)
There is machinery shaking noise	Screw is loosed	check whether the surface screws are tightened or not
Suction power is weak	Too long distance between range hood and stove	Lower the range hood installation height (done by professional people)
	Too much ventilation near the range hood leads to strong convection	Close some doors and windows
Noisy	Exhaust pipe surface is distorted	Reinstall exhaust pipe (done by professional people)

1. Change the LED light: please contact FOTILE after-sale service center.
2. If the range hood still can't work after getting rid of the above malfunctions, please contact FOTILE service center.

Installation

Packing List

	Complete Appliance	1		Wooden Screw 4 5x60	7
	Pothook	1		Oil Cup	1
	Decorative Cover	1		Safety Block	1
	Decorative Cover Pothook	1		Upper Seal Mat	1
	Cross Recess Head Self-tapping Screw ST 3.9x9.5	6		User Manual	1
	Expansion Pipe ф10X60	7		Exhaust Cover	1
	Cross recess pan head self-tapping locking screws M4 X 18	8		Ring suction plate assembly
	Collision Avoidance Elements	2

Installation Methods

Attentions

Suggest install the range hood after finishing the kitchen decoration.

After finishing installation, make sure the range hood can normally work, please read carefully and keep well the user manual.

Make sure to keep the appliance horizontal.

• Please abandon and recycle the old range hood which can't work any more, to protect the environment.
• If it is necessary to move the gas stove before installing the range hood, please close general gas valve before moving the gas stove.
• Please wear protective gloves to avoid your hands being hurt by rang hood sharp edge.
• The range hood is heavy and the installation is complex, so the installation should be done by professional people according to the user manual.
• Please use specialized power socket and it should be connected with reliable ground wire to ensure safety.
• Please do not damage the electric wire and other hidden equipment when drilling on wall. Power off the range hood when installing.
• The wall should be strong enough to support the range hood, otherwise the range hood may drop down and result in damage.
• Accessible parts may become hot when used with cooking appliances. The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards This appliance is not intended for using by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  Children should be supervised to ensure that they do not play with the appliance.
• Please use accessories provided by FOTILE company to ensure safe and well installation.
• Make sure the tightness between expansion pipe and wall hole, and please don't drill the hole too big, to avoid drop due to expansion pipe loosening. Make sure the exhausting pipe can reach outdoors to avoid the fire and keep the fresh air in the room. Please don''t make the waste gas stay indoor, loft, garage, etc. (This is only for ducted range hood)The waste air from the range hood couldn't share the same flue with other inflamble gas.
• Package of new range hood: To keep a well environment, please deal with the plastic package by environmental way. Packing material is not toy, so please keep the plastic bags and box away from the infant to prevent such dangers as suffocation, etc.

Installation Suggestions

Installation Position

The range hood is only for family use only; Please do not use the range hood under other conditions.
The range hood should be installed above the stove. Keep parallel between the blower outer cover bottom end and cabinet bottom end.
The temperature of the range hood should not be more than 104°F.
The wall should be none-flammable. Never install the range hood on the flammable wooden wall.

Range Hood and Wall Cupboard Standard Combination Size Installation Diagram

Unit: inch(mm)

EMS9016

Hole Size of Cabinet on Top Surface

Exhaust pipe through cabinet

Installation diagram for the top decorative cover pot nook

Exhaust pipe through ceiling

EMS9017

Hole Size of Cabinet on Top Surface

Exhaust pipe through cabinet

Installation diagram for the top decorative cover pothook

Exhaust pipe through ceiling

EMS9018

Hole Size of Cabinet on Top Surface

Exhaust pipe through cabinet

Installation diagram for the top decorative cover pothook

Exhaust pipe through ceiling

Blower outer cover bottom and cabinet bottom should be even.

Preparation before installation

1. Warning. Please don't make sundries into exhaust pipe to avoid damaging the range hood.
   Estimate the exhaust pipe position. A straight and short exhaust pipe makes smoke extraction more smooth, please refer to installation diagram.
   The joint between exhaust pipe and wall hole should be sealed with tape, and ensure firm connection between exhaust pipe and exhaust cover.
   Too small wall hole will affect smoke extraction, therefore, please broaden the wall hole to fit exhaust pipe size under safety condition.
2. Tool preparation
   Please prepare the following tools before range hood installation.
   1. Impact electric drill (with drillbit of )
   2. Cross screwdrive
   3. Internal hexagonal wrench (M6)
   4. Measuring taper
   5. Hammer

Installation Steps

1. Demount the two screws which is for fixing the blower outer cover, take down the blower outer cover and decorative cover. Reserve drill bit for the impact electric drill.
2. Refer to Fig 1, set the right position on the wall to drill and then firmly imbed the expansion pipe. Insert wooden screws to tighten the fixed hook and decorative cover hook; you can also use two ST3.9X9.5 self-tapping screw to fix the decorative cover on the suspended celiling.
3. Use eight M4x18 screws to fix the exhaust cover and sealing ring on the top of appliance.
4. Use ST3.9X9.5 self-tapping screws to fix the exhaust pipe on the exhaust cover.
5. Hang the hood firmly: face squarely- not slanting, side-look-ing-the hood will tightly stick the wall and a little lacune.
6. Install the exhaust pipe according to Fig 1:
   
   
   check the pipe shell is not bulging and not shriveled, curve freely. The exhaust pipe and wall should be tightly connected to prevent smoke back, the backflow barrier blade should be up and down smoothly.
7. Confirm the churn drilling hole position according to Fig 2,
   
   
   firmly imbed the expansion pipe, fix the safety block, and screw in the wooden screw to fix.
8. Blower outer cover and decorative cover installation
   1. Put the decorative cover inside of the blower outer cover.
   2. Take up the blower outer cover and decorative cover meantime; inject the decorative cover into its pothook, then push the decorative cover and blower outer cover along the pothook assembly to the end.
   3. After pushing the decorative cover and blower outer cover to the end, the blower outer cover will slip down slowly, and inject the blower outer cover buckle to the blower rack, then insert the blower outer cover to the gap which is between top panel and blower rack.

1. Please take down the blower outer cover before installation.
2. If you install the range hood matching with cabinet, then exchange Step (4) and Step (5).
3. Please select right drill bit according to the drilling place specific situation.

9. Installation of ring suction plate
   1. Hold the front side of the ring suction plate firmly with both hands, and place the left and right pothooks on the rear side of ring suction plate into the left and right hook racks of the smoke collecting hood;
   2. Prop the ring suction plate with both hands, make it spiral upward, push in while the ring suction plate spirals, finally make the touch claw on the ring suction plate insert into he touch button on the smoke collection hood;
10. Install anti-collision accessories, firstly remove the double faced adhesive tape (see Figure 3),
    
    
    then stick the anti-collision accessories to the corner of the smoke exhaust (see Figure 4);
    
    
11. Install the oil cup assemblies (see Figure 5);
    
    
12. Insert the host power plug into the power outlet.

Debugging

1. Connect the power plug.
2. Press the "" button, check the light
3. Press the "" button, to check if the motor is at normal operation. If there is abnormality, Please turn off the power immediately, and check if it is the problem of installation.
   (Please contact with FOTILE distributor or service center.)
   1. The body of hood shakes heavily.
   2. The expansion pipe is loose.
   3. The impeller doesn't work.
   4. Big noise from the impeller running.
   5. Abnormal noise from motor.
4. Press the Power key, the turbine and the light are off.

Main Technical Specifications

Model	EMS9016/EMS9017/EMS89018
Voltage/Frequency	120V/60Hz
Rated power inputof the range hood	310W (light power included 2W)
Speed	High setting	Low setting
CFM(HVI)	460	350
Noise(sones)	3.6	2.2
Noise(dB(A))	64	58
Max static pressure(Pa)	500
The dB(A) noise in the above table is tested in accordance with IEC60704 standard, which indicates the sound power level. Pressure level, to answer for: high setting 50 dB, low setting 44 dB. The noise --Sones -- in the above table is tested in accordance with HVI-915-2015 in HVI-accredited laboratories in American. Such parameters as air volume and noise may have a deviation of less than 10%.

HVI-2100 CERTIFIED RATINGS comply with by the Home Ventilating Institute for off-the-shelf products, as they are available to consumers. Product performance is rated at 0.1 in. static pressure, based on tests conducted in a state-of-the-art test laboratory. Sones are a measure of humanly-perceived loudness, based on laboratory measurements.

CERTIFIED Component Name Diagram

EMS9016

EMS9017

EMS9018

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download FOTILE EMS9016, EMS9017, EMS9018 - Range Hood Manual