Siemens HB974GL 1 Series User Manual And Installation Instructions page 27

Table of Contents

Advertisement

Close the metal strip on the left and right
3.
Note: The lettering "Pyro" must be legible at the top,
4.
as shown in the picture.
Slide the inner pane into the retainer at the bottom
and fit it at the top.
22  Rails
To thoroughly clean the rails and the cooking compart-
ment, or to replace the rails, you can remove the rails.
22.1 Detaching the rails
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
Always allow the appliance to cool down.
Keep children at a safe distance.
Lift the rail forwards slightly
1.
Pull the whole rail to the front
2.
⁠ .
and detach it
⁠ .
and remove it.
Push the inner pane in at the top
5.
caps
downwards in the direction of the arrow.
Open the appliance door fully.
6.
Close the locking levers on the left- and right-hand
7.
hinges
Close the appliance door.
8.
Note: Do not use the cooking compartment again until
the door panes have been correctly fitted.
Clean the rail.
3.
→ "Cleaning products", Page 20
22.2 Attaching the rails
Notes
¡ The rails only fit on the right or left.
¡ For both rails, ensure that the curved rods are at the
front.
First, push the rail into the middle of the rear
1.
socket 
until the rail rests against the cooking
compartment wall, and then push this back
Rails en
. Push the sliding
⁠ .
27

Advertisement

Table of Contents
loading

Table of Contents