Table of Contents
Advertisement
M3057-PLR Mk II Dome Camera
Specifications
NOTICE
TICE
NO
NO
TICE
• Risk of damage to SD card. Don't use sharp tools, metal objects, or excessive force when inserting or removing the SD card.
Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Unmount the SD card from the device's web interface before removing it.
Don't remove the SD card while the product is running.
This device supports SD/SDHC/SDXC cards.
This device supports microSD/microSDHC/microSDXC cards.
For SD card recommendations, see axis.com.
SD, SDHC, and SDXC Logos are trademarks of SD-3C LLC. SD, SDHC and SDXC are trademarks or registered
trademarks of SD-3C, LLC in the United States, other countries or both.
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are
trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.
Buttons
Control button
The control button is used for:
•
Enabling the Focus Assistant. Press and very quickly release the Control button.
•
Resetting the product to factory default settings. See Reset to factory default settings on page 61.
•
Ensuring the camera is level. Press the button for not more than two seconds to start the leveling assistant and press
again to stop. The status LED and buzzer signal (see ) assist leveling of the camera. The camera is level when the buzzer
beeps continuously.
•
Ensuring the camera is level. Press the button for not more than two seconds to start the leveling assistant and press again
to stop. The buzzer signal (see ) assist leveling of the camera. The camera is level when the buzzer beeps continuously.
•
Connecting to an AXIS Video Hosting System service. To connect, press and hold the button for about 3 seconds until the
status LED flashes green.
•
Connecting to a one-click cloud connection (O3C) service over the internet. To connect, press and hold the button
for about 3 seconds until the status LED flashes green.
Connectors
Network connector
The Axis product is available in two variants with different network connectors:
RJ45 Ethernet connector.
RJ45 Ethernet connector with Power over Ethernet (PoE).
RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).
RJ45 with High Power over Ethernet (High PoE).
RJ45 Push-pull Connector (IP66) with High Power over Ethernet (High PoE).
RJ45 Ethernet service port.
55
Advertisement
Table of Contents
