Table of Contents
Advertisement
M3057-PLR Mk II Dome Camera
Specifications
Network LED
Green
Amber
Unlit
Power LED
Green
Amber
Microphone power LED
Unlit
Blue
Wireless LED
Unlit
Green
Red
Amber
Note
• The tally LED (indication LED) only indicates network transmission. If video or audio is only transmitted through HDMI
or SDI the tally LED will be unlit.
Tally LED
Unlit
Red
SD card slot
CAUTION
Moving parts. Risk of injury. Keep your body parts away from the product when it's in operation. Disconnect from power
supply before installing or performing maintenance on the product.
CAUTION
Hot surface. Risk of injury. Don't touch the product when it's in operation. Disconnect from power supply and allow the
surfaces to cool before performing maintenance on the product.
Indication
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Steady for connection to a 1 Gbit/s network. Flashes for network activity.
Steady for connection to a 10 Mbit/s network. Flashes for network activity.
Steady for connection to a 10/100 Mbit/s network. Flashes for network activity.
No network connection.
Indication
Normal operation.
Flashes green/amber during firmware upgrade.
Indication
Phantom power off.
Phantom power on.
Steady when the phantom power is on and the microphone is connected.
Flashes when the phantom power is on and the microphone is disconnected.
Indication
Wired mode.
Steady for connection to a wireless network. Flashes for network activity.
Steady for no wireless network connection. Flashes while scanning for wireless networks.
Steady or flashing during wireless network pairing.
Indication
Camera idle.
Active network transmission or recording.
54
Advertisement
Table of Contents
