Table of Contents
Advertisement
M3057-PLR Mk II Dome Camera
The web interface
• Name: Enter a descriptive name. This can, for example, be a first and last name, a role, or a location. The name is
not unique.
• User ID: Enter the unique extension or phone number assigned to the device.
• Peer-to-peer: Use for direct calls to another SIP device on the local network.
• Registered: Use for calls to SIP devices outside the local network, through a SIP server.
• Domain: If available, enter the public domain name. It will be shown as part of the SIP address when calling other
accounts.
• Password: Enter the password associated with the SIP account for authenticating against the SIP server.
• Authentication ID: Enter the authentication ID used for authenticating against the SIP server. If it is the same as the
user ID, you don't need to enter the authentication ID.
• Caller ID: The name which is presented to the recipient of calls from the device.
• Registrar: Enter the IP address for the registrar.
• Transport mode: Select the SIP transport mode for the account: UPD, TCP, or TLS. When you select TLS, you get the
option to use media encryption.
• Media encryption (only with transport mode TLS): Select the type of encryption for media (audio and video) in SIP calls.
• Certificate (only with transport mode TLS): Select a certificate.
• Verify server certificate (only with transport mode TLS): Check to verify the server certificate.
• Secondary SIP server: Turn on if you want the device to try to register on a secondary SIP server if registration
on the primary SIP server fails.
• Answer automatically: Select to automatically answer an incoming call.
• SIP secure: Select to use Secure Session Initiation Protocol (SIPS). SIPS uses the TLS transport mode to encrypt traffic.
• Proxies
-
-
-
-
-
• Video
-
-
-
-
• DTMF
-
-
-
-
-
SIP test call
SIP account: Select which account to make the test call from.
SIP address: Enter a SIP address and click
Storage
Network storage
Proxy: Click to add a proxy.
Prioritize: If you have added two or more proxies, click to prioritize them.
Server address: Enter the IP address of the SIP proxy server.
Username: If required, enter the username for the SIP proxy server.
Password: If required, enter the password for the SIP proxy server.
View area: Select the view area to use for video calls. If you select none, the native view is used.
Resolution: Select the resolution to use for video calls. The resolution affects the required bandwidth.
Frame rate: Select the number of frames per second for video calls. The frame rate affects the required
bandwidth.
H.264 profile: Select the profile to use for video calls.
Use RTP (RFC2833): Select to allow dual-tone multifrequency (DTMF) signaling, other tone signals and
telephony events in RTP packets.
Use SIP INFO (RFC2976): Select to include the INFO method to the SIP protocol. The INFO method adds
optional application layer information, generally related to the session.
DTMF sequence: Click to add an action rule triggered by touch-tone. You must activate the action
rule in the Events tab.
Sequence: Enter the characters to trigger the action rule. Allowed characters: 0–9, A-D, #, and *.
Description: Enter a description of the action to be triggered.
to make a test call and verify that the account works.
40
Advertisement
Table of Contents
