•
Move the lift lever backward
to lower the sleeve
hitch.
•
Attach an implement
using the sleeve hitch pin.
Tighten the stabilizer
bolts against the implement
hitch and then tighten the jam nuts.
IMPORTANT:
Some implements
may require that the
stabilizer
bolts not be tightened.
Refer to your
implement owner's manual.
•
Use the 5/16" x 1-3/4" carriage
bolt to adjust the
depth so that the attached implement
is level front
to back during operation.
To remove the entire Sleeve Hitch attachment,
remove the 5/8" x 1-3/4" hex bolt and 5/8" nylock
nut which fasten the bottom of the sleeve hitch to
the tractor hitch, then lift the attachment
of the
tractor.
To tow an implement
that has a tow hitch, simply
remove the three clevis pins and then remove the
Sleeve Hitch Lift Assembly from the Sleeve Hitch
Frame Assembly.
•
Clean off after each use.
•
Oil pivot points as needed.
•
Store in a dry location.
6