Subscribe to Our Youtube Channel
Related Manuals for Relay2 RA800
Summary of Contents for Relay2 RA800
- Page 1 H A R D W A R E I N S T A L L A T I O N G U I D E RA800 SERVICE-READY ACCESS POINT Doc No.: PRDT-0046 | Version 2.0 | Date 2023-08-21 ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
-
Page 2: Product Overview
RA830E—to support various deployment needs. For more information about the RA800 family, refer to www.relay2.com. 1525 McCarthy Boulevard, Suite 209 Milpitas, CA 95035, USA www.relay2.com +1 (408) 380-0031 ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com... - Page 3 • Do not put anything on top of the AP. If the AP gets liquid in it, please disconnect the power supply, disconnect all network connections, and contact authorized distributor of Relay2, Inc. ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 4 PACKAGE CONTENT - RA800 Access Point 2.4 GHz Detachable Antennae 5 GHz Detachable Antennae Pole Mount Kit Ground Cable Wall Mount Kit ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 5 2. Use the appropriate drill bit to drill four 8 mm diagram and 37 mm depth holes in the markings and hammer the bolts into the openings. ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 6 3. Place the lock and a washer on the round-head screws and drive the screws to attach the mounting base to the back of the access point. ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 7 Wall Mount the AP 4. Attach the device onto the wall by tightening the bolt’s flat washers and nuts to secure the mounting base to the mounting surface. ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 8 1. Place the lock and flat washer on the cap screws and drive the screws to attach the mounting base to the back of the access point. ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 9 Pole Mount the AP 2. Determine which placement is to be assembled. Drive the four round-head screws to attach the pole mount bracket to the mounting base. ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 10 Pole Mount the AP 3. Thread the open end of the pole strap through the two tabs on the pole mount bracket. ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 11 Pole Mount the AP 4. Determine where the AP is to be fastened. Lock and tighten the pole strap to secure the pole mount bracket to the pole. ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
Need help?
Do you have a question about the RA800 and is the answer not in the manual?
Questions and answers