Relay2 RA320 Smart Access Point Hardware Installation Guide Trademarks: Relay2 logo is a trademark of Relay2, Inc. of US. Company Headquarters: 1525 McCarthy Blvd. #209, Milpitas, CA 95035, USA www.relay2.com Phone: +1 408-380-0031 Product Overview: The RA300 family is a cloud-managed Service-Ready Access Point (SR-AP) offering edge computing and storage capabilities with high-performance wireless access point integrated.
To avoid radio interference, keep the device away from magnets or magnetic fields, ie: do not place near microwave, refrigerator ...etc. Power Source Options The RA320 access point can be powered by using the external Relay2 AC Adapter, PoE Injector (both sold separately), or a third-party PoE+ switch. Warranty ...
Page 6
Relay2 RA320 Smart Access Point Hardware Installation Guide Wall Mount the AP Determine where the AP is to be placed and mark location on the surface for the two mounting holes. You may adjust the position with a level.
Page 8
Relay2 RA320 Smart Access Point Hardware Installation Guide Kensington Lock – Security Feature Attach a Kensington lock cable to the access point at the hard point on the side of the RA320. Attach the other end of the cable to a secure location, such as a pipe or building fixture.
Page 9
Relay2 RA320 Smart Access Point Hardware Installation Guide Verify RA320 Functionality First check if the status LED is solid green. During first boot, it is highly likely that the AP is automatically updating its firmware, indicated by an amber blinking status LED. The status LED should turn solid green after the upgrade process has finished (normally within a few minutes).
Relay2 RA320 Smart Access Point Hardware Installation Guide FCC Disclaimer § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the RA300 Series and is the answer not in the manual?
Questions and answers