Related Manuals for Relay2 RA340
Summary of Contents for Relay2 RA340
- Page 1 H A R D W A R E I N S T A L L A T I O N G U I D E RA340 AI-ENABLED ACCESS POINT Doc No.: PRDT-0055 | Version 0.1 | Date 2023-08-23 ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 2 RA340—to support various capacity and deployment needs. For more information about the RA300 family, refer to www.relay2.com. 1525 McCarthy Boulevard, Suite 209 Milpitas, CA 95035, USA www.relay2.com +1 (408) 380-0031 ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
-
Page 3: Warranty
Relay2 Inc. • Reasonable repair and shipping costs will be charged for product faults or damage caused by using non-Relay2 accessories or improper operation. ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com... - Page 4 PACKAGE CONTENT - RA320 Access Point Ceiling Mount Kit Ceiling Mount Kit Wall Mount Kit 15/16 9/16 M3x16L screws and anchors ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 5 AP OVERVIEW Interfaces LED Indicators Kensington Lock Hard Point ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 6 Use the appropriate drill bit to drill two 4 mm wide and 37 mm deep holes and insert the screw anchors into the openings. Fasten the mounting plate with the provided screws. • Slide the AP into the wall mounting plate. ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 7 Select the matching T-rail mount kit for the used T-rail size and slide the bracket into the AP. • Slide the AP into the T-rail mount. ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 8 See the LED indicator table below for more details. Verify access point connectivity—use any 802.11 client device to connect to the RA340 AP and verify network connectivity using the client device web browser by going to a well- known web page.
- Page 9 This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Operations in the 5.15-5.35GHz band are restricted to indoor usage only. ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 10 European Union. EU Declaration of Conformity • We, Relay2, Inc. (1525 McCarthy Blvd., Suite 209, Milpitas, CA 95035, USA) hereby declares that this Smart Access Point is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
- Page 11 (APPENDIX A) DEVICE MANAGER USER INTERFACE Introduction The Relay2 Access Point (AP) starts functioning without preconfiguration under typical network condition. The AP is able to connect to the Relay2 NMS when the following prerequisites are met: • The DHCP server is reachable, and the AP can get an IP address.
- Page 12 The IP address of the target AP is used to access DM GUI even at stand-alone. Link-Local IP Address of RA641 The link-local IP address of the Relay2 AP, 169.254.0.0 network, is calculated from the right four digits of the AP MAC address. For example, if the MAC address is B4:82:C5:00:6B:E6, then the link-local IP address of that AP is 169.254.107.230.
- Page 13 E.g., in the case that the AP IP address is 169.254.107.230, then https://169.254.107.230:9999. Note: Relay2 AP is not registered for CA certification, so a warning message for a privacy error could be seen upon the first DM GUI access, like below. Please continue the access.
- Page 14 E.g., MAC address = B4:82:C5:00:7D:DB, S/N = EMP6610100C00617 Username: b482c5007ddb Password: EMP6610100C00617 If login is successful, the initial page, as below, is shown. Figure 4: DM GUI initial page ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 15 DM GUI provides commands, configurations, and diagnosis. Commands By clicking the “+” mark to right of the Commands tab, the list of available commands opens. Figure 6: Commands ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 16 This feature can be used to identify deployed APs easily at the site. Note that LEDs do not show the AP status when this command is active. ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 17 A new configuration will be valid once the reboot is completed. You can leave the parameters empty in case you want to keep the current values. Figure 8: AP configuration ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 18 APN for USIM Auth Authentication mode of network access via USIM (both, chap or pap) (small letters only) Username Username for authentication of network access ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 19 Diagnostics. Note: The results of diagnostics appear in a pop-up window. Please allow pop-ups on this site (IP address) before the execution. Figure 9: Diagnostics ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 20 By clicking “Load Proxy Diagnostics Log” or “Load SCM Diagnostics Log,” the latest results of “Proxy Diagnostics” or “SCM Diagnostics,” respectively, are shown on the pop-up window. The pop-up window page supports “Re-run Diagnostics” and “Re-load Diagnostics” for re-execution. ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
- Page 21 Input the username and password (twice), then click “Apply.” By clicking “-“ on the right, the defined user is deleted. Figure 12: User Management (Add New User) ©2023 by Relay2, Inc. All Rights Reserved | www.relay2.com | (408) 380-0031 | sales@relay2.com...
Need help?
Do you have a question about the RA340 and is the answer not in the manual?
Questions and answers