Related Manuals for Relay2 RA620M
Summary of Contents for Relay2 RA620M
- Page 1 Hardware Installation Guide Relay2 RA620M - Smart Access Point Doc No.: PRDT-0060 Version:1.0 Date: 2021-09-09 Copyright © Relay2, Inc. 2021. All rights reserved.
-
Page 2: Product Overview
It enables businesses to deliver superior venue experiences, enhance business operations, and create competitive advantages. The RA600 family consists of various models, including RA620 and RA620M to support various capacity and deployment needs. For more information about the RA600 family, refer to www.relay2.com. -
Page 3: Opening The Package
To avoid radio interference, keep the device away from magnets or magnetic fields, ie: do not place near microwave, refrigerator ...etc. Power Source Options • The RA620 access point can be powered by using the external Relay2 AC Adapter, PoE Injector (both sold separately), or a third-party PoE+ switch. Warranty •... - Page 4 Relay2 RA620M Smart Access Point Hardware Installation Guide Package Content – RA620 LTE Antenna Access Point Wall-Mount Kit M3.5 screws and anchors for masonry PRDT-0060 © Relay2, Inc. 2021. All rights reserved.
- Page 5 Relay2 RA620M Smart Access Point Hardware Installation Guide AP Overview: Interfaces: LED Indicators: PRDT-0060 © Relay2, Inc. 2021. All rights reserved.
- Page 6 The RA620M requires a standard size SIM card to activate the build in LTE functionality. Please insert the standard size SIM card into the SIM card slot located at the interface panel of the RA620M. As the RA620M is using a spring-loaded push/push SIM card slot, please push the SIM card into the slot until the spring mechanism holds the SIM card in place.
- Page 7 Relay2 RA620M Smart Access Point Hardware Installation Guide Wall Mount the AP • Determine where the AP is to be placed and mark location on the surface for the two mounting holes. You may adjust the position with a level.
- Page 8 Relay2 RA620M Smart Access Point Hardware Installation Guide T-Rail Mount the AP The RA620 T-Rail mount is sold separately. Order number is RA620-T-MK-01. • Adjust the T-rail mount to the used T-rail size and fix the mounting bracket to the T-rail.
- Page 9 Relay2 RA620M Smart Access Point Hardware Installation Guide Verify RA620 Functionality Before starting the verification procedure, please make sure make sure both LTE antennas are connected properly and SIM card is activated and inserted. First check if the status LED is solid green. During first boot, it is highly likely that the AP is automatically updating its firmware, indicated by an fast blinking status LED .
-
Page 10: Fcc Disclaimer
Relay2 RA620M Smart Access Point Hardware Installation Guide FCC Disclaimer § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the RA620M and is the answer not in the manual?
Questions and answers