Before Calling For Service - Hyundai DFA 1267 DX7 Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

Start of dishwasher
The followings should be checked before starting the dishwasher.
1)
Whether the dishwasher is level and fixed
)
Whether the inlet valve is opened
3)
Whether there is leakage at the connections of the conducts
4)
Whether the wires are tightly connected
5)
Whether the power is switched on
6)
Whether the inlet and drain hoses are knotted
7)
All packing materials and printings should be taken out from the dishwasher
Attention
After installation, please put this manual into the bags of printings. The content of this manual is
very helpful to the users.
9. TRObLEShOOTINg TIPS

before Calling for Service

Review the charts on the following pages may make you be free of calling for service.
Problem
Dishwasher
doesn´t run
Noise
Možné příčiny
Fuse blown, or the circuit breaker
acted
Power supply is not turned on
Water pressure is low
Some audible sounds are normal
Utensils are not secure in the
baskets or something small has
dropped into the basket
Motor hums
what to do
Replace fuse or reset circuit breaker.
Remove any other appliances sharing
the same circuit with the dishwasher.
Make sure the dishwasher is turned on
and the door is closed securely.
Make sure the power cord is properly
plugged into the wall socket.
Check that the water supply is con-
nected properly and the water is tur-
ned on.
Sound from soft food shredding action
and detergent cup opening.
To ensure everything is secured in the
dishwasher.
Dishwasher has not been used regu-
larly. If you do not use it often, remem-
ber to set it to fill and pump out every
week, which will help keep the seal
moist.
EN - 82

Advertisement

Table of Contents
loading

Table of Contents