Attention - Hyundai DFA 1267 DX7 Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

Are not suitable
Cutlery with wooden, horn china or mother-of-pearl handles
Plastic items that are not heat resistant
Older cutlery with glued parts that is not temperature resistant
Bonded cutlery items or dishes
Pewter or cooper items
Lead crystal glass
Steel items subject to rusting
Wooden platters
Items made from synthetic fibres
Are of limited suitability
Some types of glasses can become dull after a large number of washes
Silver and aluminium parts have a tendency to discolour during washing
Glazed patterns may fade if machine washed frequently
NOTE:
Do not put in items that are dirty of cigarette ash, candle wax, lacquer or paint. If you buy new
dishes please make sure that they are suitable for dishwashers.
NOTE:
Please do not overload your dishwasher. There is only space for 12 standard dishes. Do not
use dish that is not suitable for dishwashers. This is important for good results and for reasona-
ble energy consume.
Loading cutlery and dishes
Before loading the dishes, you should:
Remove large left-over
Soften rem nants of burnt food in pans
when loading the dishes and cutlery, please note:
Dishes and cutlery must not impede the rotation of the spray arms
Load hollow items such as cups, glasses, pans etc. with the opening downw ards so that
water cannot collect in the container or a deep base.
Dishes and items of cutlery must not lie inside one another, or cover each other.
To avoid damage to glasses, they must not touch
Load large items which are most difficult to clean into the lower rack.
The upper rack is desi gned to hold more delicate and lighter dishware such as glasses, coff-
ee and tea cups

Attention!

Long bladed knives stored in an upri ght position are a potential hazard!
Long and/or sharp items of cutl ery such as carving knives must be positioned horizontally in the
upper basket .
Damage to glassware and other dishes
EN - 72

Advertisement

Table of Contents
loading

Table of Contents