Honda Click125i 2022 Owner's Manual page 37

You need to operate this process from the
u
(Off) position to the (On) position
within 5 seconds.
SET button
(On)
Turn and keep the ignition switch to the (On)
!c
position. Press the SET button to select among
3 sensitivity levels of anti-theft alarm system.
3 times of alarm sound: high sensitivity
2 times of alarm sound: middle sensitivity
1 time of alarm sound: low sensitivity
The alarm indicator lights while setting.
Turn the ignition switch to the
!d
position to finish setting the sensitivity level.
To complete your setting, you need to go
through step 3 within 60 seconds.
Make sure that LED on the remote
(Off)
transmitter is green before setting the
sensitivity level.
Because if it is red, you cannot set the
sensitivity level.
LED
#
If any of the following situations arise, battery
(
or there is a system problem. Remove the
battery and see your dealer.
The alarm does not sounds.
(Off)
The alarm sounds but fades out.
The alarm system does not stop.
If the Anti-theft Alarm System Does
Not Operate Properly
) in the scooter is discharged
P. 61
2
33