Honda Click125i 2022 Owner's Manual page 35

If the ignition switch is left in the
position for more than 10 days, the anti-theft
alarm system will no longer operate. During
the system is activating, when the scooter
receives a signal by pressing the SET/UNSET
button, the system activation will be extended
for 10 days. To reset the system, turn the
ignition switch to the (On) position once.
The anti-theft alarm system uses low-intensity
radio waves. It may affect medical equipment
such as a cardiac pacemaker.
NOTICE
When the battery in the scooter is weak, the anti-theft
alarm system may not function.
#
Setting the Anti-theft Alarm System
Turn the ignition switch to the
!a
position or the (Lock) position.
Press the SET button. Within a second, the
!b
turn signal light blinks and the buzzer sounds
for 1 time. After 2 seconds, the buzzer
(Off) sounds 1 time. The anti-theft alarm system is
activated.
The buzzer sound can be cancelled using
temporary silence mode.
#
Temporary Silence Mode
The alarm indicator flashes while the alarm
system is activated.
The anti-theft alarm system is cancelled when
ignition switch is turned to the (On) position.
SET button
(Off)
#
Cancelling the Anti-theft Alarm System
(P32)
#
Adjusting the Sensitivity of Anti-theft
Alarm System
#
If the Anti-theft Alarm System Does
Not Operate Properly
(P38)
Alarm indicator
(P32)
(P33)
continued 31