Table of Contents
Advertisement
Available languages
Available languages
2
Press
to change the
setting*.
Each press cycles between "ON" and
"OFF".
[Lit up]
[Unlit]
"ON"
"OFF"
Press
to change the setting*.
Each press cycles between "Quiet",
"OFF" and "Fan stop".
[Lit up]
[Lit up]
"Quiet"
"OFF"
"Fan stop"
* If the lamps do not change even after the settings were changed, unplug the unit, wait at least 5 seconds, then re-insert the power supply plug and
repeat the above procedure from the beginning.
Press
A short beep sounds, the humidifier
lamp blinks, and the FAN lamp changes
to the following display according to the
setting.
[Blinking]
"ON"
Press
A short beep sounds, the water supply
lamp blinks, and the FAN lamp changes
to the following display according to the
setting.
[Unlit]
[Blinking]
"Quiet"
3
.
[Blinking]
[Unlit]
"OFF"
.
[Blinking]
[Blinking]
[Unlit]
"OFF"
"Fan stop"
Advanced Settings
4
While the lamp is blinking,
unplug the power supply
plug, wait at least
5 seconds, and then insert
the power supply plug
again.
Setting is now complete.
Power supply plug
Power socket
• If this procedure is not performed,
the unit will not return to regular
operation mode.
• The settings will be remembered
even if the power supply plug is
removed.
The setting is complete
when it blinks or lights up
for about 5 seconds and
then turns off.
34
Advertisement
Chapters
Table of Contents
