Troubleshooting - Wilfa PERFORMANCE THERMO Instruction Manual

TROUBLESHOOTING

Problem Possible reasons
Coffee maker does Power cord is not
not start plugged in.
Power switch is not "on"
No water in the water
tank
Pump is dry
Coffee maker Limescale in the product Descale the coffee maker
stops
The coffee is not The glass jug is very
hot enough cold
Filter holder Drip-stop is locked
overflowing
Coffee ground clogging
the flow-control valve at
the bottom of the filter
holder.
Coffee too finely ground
COFFEE BREWER · CM9B-T125, CM9T-T125
11
Solutions
Plug into power socket
Turn on power switch (see No.1
in the description)
Fill the water tank
Run the unit with it's water tank
filled to maximum capacity
(1.25L)
Preheat the jug with hot water
Open the drip-stop
Set the flow control to 1,25
and rinse the filter holder by
running water through it.
Use filter coffee
EN