Cleaning & Maintenance - Wilfa PERFORMANCE THERMO Instruction Manual

• Use the brewing lid when brewing, and the pouring lid when serving to
EN
achieve the optimal temperature and minimize heat loss during brewing and
serving.
CLEANING INDICATOR
The light on the start button will slowly pulsate when you start the 180th brewing
process. The coffee machine indicates that it is time for cleaning, and you should
then clean the unit. The button will pulsate for three brewing cycles before the
counter automatically resets.
CLEANING & MAINTENANCE
CLEANING
• Use a cleaning product, like Clean drop or other detergents intended for
cleaning coffee makers. Remember to brew through with clean water after the
cleaning process.
• If necessary, the device may be cleaned with a damp cloth without any
additives.
• Filter holder with lid and thermo jug can be washed in hot soapy water or
placed at the top in the dishwasher. Do not wash the brewing lid or pouring
lid in the dishwasher.
• Never wash other parts of the device in the dishwasher. Never use strong
detergents, scouring powders, steel wool or other release agents on any part
of the coffee maker.
DESCALING
• Use a commercially available descaling detergent.
• Descaling should be done, as needed. In areas with hard water, descaling
must be done regularly.
INSTRUCTION MANUAL · PERFORMANCE THERMO
10