ICON Health & Fitness PRO-FORM 505 CST User Manual page 13

12. Identify the Left and Right Handrail Covers
(87, 98).
Slide the Left Handrail Cover (87) up against the
console assembly (F) and tighten a #8 x 3/4"
Screw (4) into the bottom of the Left Handrail
Cover. Be careful not to overtighten the
Screw.
Attach the Right Handrail Cover (98) in the
same way.
13. Raise the Frame (56) to the upright position.
Have a second person hold the Frame until
step 15 is completed.
Remove the two 5/16" x 3/4" Screws (8) from the
Latch Crossbar (23).
Orient the Latch Crossbar (23) as shown. Make
sure that the "This side toward belt" sticker
(H) is facing the treadmill. Attach the Latch
Crossbar to the brackets (I) on the Frame (56)
with the two 5/16" x 3/4" Screws (8) that you just
removed and two 5/16" Star Washers (11).
12
F
87
4
13
I
11
8
56
13
98
4
H
23
I
11
8