Whirlpool OMSR58RU0SX Quick Manual page 5

Table of Contents

Advertisement

Use
or
to set the time you want cooking to end and
press
to confirm.
Activate the function by turning the thermostat knob to the
temperature you require: the function will remain paused
until it starts automatically after the period of time that has
been calculated in order forcooking to finish at the time
you have set.
Please note: To cancel the setting, switch the oven off by turning
the selection knob to the position.
Delay to start functionality in not available for Grill and
Turbo Grill functions.
END OF COOKING
An audible signal will sound and the display will indicate
that the function has finished.
Turn the selection knob to select a different function or to
to switch the oven off.
Please note: If the timer is active, the display will show "END"
alternately with the remaining time.
5.
SETTING THE TIMER
This option does not interrupt or program cooking but
allows you to use the display as a timer, either during while
a function is active or when the oven is off.
Keep pressing
until the
start flashing on the display.
Use
or
to set the time you require and press
confirm. An audible signal will sound once the timer has
finished counting down the selected time.
Notes: To cancel the timer, keep pressing
starts flashing, then use
and "00:00" icon and "00:00"
until the
to reset the time to "00:00".
6.
AUTOMATIC CLEANING FUNCTION – PYRO
Do not touch the oven during the Pyro cycle.
Keep children and animals away from the oven
during and after (until the room has finished
airing) running the Pyro cycle.
Remove all accessories - including shelf guides - from the
oven before activating the function. If the oven is installed
below a hob, make sure that all the burners or electric
hotplates are switched off while running the selfcleaning
cycle.
For optimum cleaning results, remove the worst soiling
with a damp sponge before using the Pyro function.
Avoid activating the pyro cycle cleaning in the presence of
limescale residues.
We recommend only running the Pyro function if the
appliance contains heavy soiling or gives off bad odours
during cooking.
To activate the automatic cleaning function, turn the
selection knob and the thermostat knob to the
function will be activated automatically, the door locked
and the light inside the oven switched off: The display
will show the time remaining to the end, alternating with
"Pyro".
Once the cycle has been completed, the door remains
locked until the temperature inside the oven has returned
to a safe level. Air the room during and after running the
Pyro cycle.
to
icon
icon. The
5

Advertisement

Table of Contents
loading

Table of Contents