Table of Contents
Advertisement
Intercom Specifications
Dimensions: 5.75" x 3.08" x 1.05" (146 mm x 78 mm x 27 mm)
Shipping Weight: XX lbs (XX kg)
X-205-SS Faceplate: 0.060" thick (16 gauge) marine grade 316
stainless steel with a #4 brushed finish
X-205-BN Faceplate: 0.060" thick (16 gauge) 304 stainless
steel with Oil Rubbed Bronze powder paint finish
X-205-BK Faceplate: 0.060" thick (16 gauge) 304 stainless
steel with Textured Black powder paint finish
Blue LED: Call connected LED lights steady to help locate the
button in low light, flashes during dialing, then lights steady when
answered.
Camera Specifications
Image Sensor: OmniVision OV5645
Resolution: 1080p @ 15 FPS
Sensitivity: 680-mV / lux-second
Lens: 0.25 inch (6.35 mm) fixed focus
FOV (Field of View): 126°
3.08
5.75
VIKING
©
FRONT VIEW
4 - Specifications
5 - Mounting
Condensation
Drain Holes
0.375
Microphone
Radius
Speaker
BOTTOM
Set
VIEW
Screw
Mounting: Surface mount to walls, posts or single gang
electrical boxes. Attach the mounting plate in desired location
and connect the wires. Then, secure the phone to the mounting
plate with provided 8-32 set screws.
Optional Enhanced Weather Protection (EWP) Available:
EWP products are designed to meet IP66 standards and may
feature foam rubber gaskets, sealed connections, gel-filled butt
connectors, as well as potted circuit boards with internally
sealed, field-adjustable trim pots and DIP switches for easy
onsite programming. For more info on EWP, see DOD 859.
Note: For greater weather resistance, apply a bead of clear silicon
caulking around the top edge and sides of the chassis.
1.05
0.20 x 0.43
mounting slot
Set
SIDE
Screw
VIEW
5
2.92"
2.52"
UP
Mount with
this arrow
towards top
3.90"
of chassis
3.28"
0.78" diameter
wire exit hole
0.63"
(4) 0.20
0.30 diameter
diameter
countersunk
mounting
mounting hole
holes
MOUNTING PLATE
DIMENSIONS
5.32"
Advertisement
Table of Contents
