Superfront TAKUMI Mounting Instructions

Content

4 x Screws per shelf
4 x MountPads per shelf

IMPORTANT!

Screws for mounting the shelf to the wall are not
included. Examine your wall to determine what type of
screws and plugs you need to buy and where you can
drill. The diameter of the screw must not exceed 6 mm.
1.
A ach the blocks to the slats using the screws
provided. It is important that this is done by hand
with a screwdriver – not by machine. And don't use
all your strength as the screw is self-tapping.
2.
Measure where on the wall you need to drill to get
the shelf where you want it. Keep in mind that the
brackets should be mounted at a distance from the
edge of the shelf. We recommend at least 10 cm.
3.
Drill, plug and finally screw the brackets in place.
The longer end of the slat should be upwards.

TIP!

A spirit level or equivalent will help
you get the shelf straight.
Superfront /+46 8 68 44 18 14 / info@superfront.com / www.superfront.com
Mounting instructions TAKUMI SHELF 1/2
2 x Slats
1-3 Shelves (depending on model)
2 x Blocks per shelf
SIDEVIEW