Superfront TAKUMI HIGH 1/2 Mounting Instructions

Content
1 x Mounting kit
x 2
x 2 x 2 x 4
5-6 x Flat brackets
(depending on model)
3 x Screws per bracket

IMPORTANT!

We recommend two people for the assembly as the
furniture will be turned upside down. The same applies
if the furniture is to be moved – get help from a friend
to li the furniture instead of pulling/pushing it.
1.
Fit the bridge piece between the two side
pieces using the mounting kit provided.
.
Fasten all flat brackets with the supplied
screws (A) into the recesses on the leg stand.
3.
Place your furniture upside down on a flat surface
covered with protective material to avoid scratches.
Security!
A B
x 1 x 2
Be sure to always follow the safety instructions that apply to your furniture. Always secure the cabinet to the wall.
This also applies to low cabinets where the weight distribution changes drastically when the fronts open.
Especially in the case of solid quality fronts as ours. Use the anchor brackets supplied with the Ikea cabinet.
Superfront /+46 8 68 44 18 14 / info@superfront.com / www.superfront.com
Mounting instructions TAKUMI HIGH & LOW 1/2
2 x Side pieces
1 x Bridge piece
1.
2.
A
A
A
A
A
A