Superfront BRUTA TALL 1/2 Mounting Instructions

3M wet wipe

Content

Mounting sides

1.
Mount the frames, legs and plinth.
Mount your Ikea frames on the wall with the Ikea
suspension rail. A ach the Metod legs from Ikea and
then add the plinth from Superfront.
See separate mounting instructions.
2.
Cut the sides to the correct height.
Measure from the floor to the top of the mounted
frames – both at the back and front. Then cut the
sides according to the measurements.
3.
Clean the surfaces.
Use the a ached 3M wet wipe to clean the
surfaces of the cabinet and the Superfront sides.
4.
A ach the MountPads to the frames.
Place the MountPads on the sides of the frames
as shown.
NOTE! Do not remove the cover paper from the
MountPads yet!
Note!
Avoid having open sawed ends near wet areas. A lacquered surface is best but if that is not possible be sure to seal the sawn part using paint or silicone.
MountPads 40x25mm
(15 per side)
3M
VHB™
Surface Cleaner Sachet
GB
For use with 3M™ VHB™ Tapes
Poche e de Ne oyage
FR
A utiliser avec les rubans 3M™ VHB™
Reinigungstuch
DE
Für den Einsatz mit 3M™ VHB™
Superfront /+46 8 68 44 18 14 / info@superfront.com / www.superfront.com

Mounting instructions BRUTA TALL 1/2

Screws
(the number varies)