Contents 7 Other features Contents Set alarm time Set sleep timer 1 Important Adjust volume Safety Adjust display brightness Wirelessly charge your smartphone Charge through USB port 2 Your clock radio Introduction 8 Product information What's in the box Overview of the clock radio 9 Troubleshooting 3 Get started Install batteries...
1 Important • Battery usage CAUTION - To prevent battery leakage which may result in bodily injury, property damage, or damage to the clock radio: • Install all batteries correctly, + and - as marked on the unit. Safety • Remove batteries when the unit is not used for a long time.
Overview of the clock radio SLEEP ① Congratulations on your purchase, and Set the sleep timer. welcome to Philips! To fully benefit from the SOURCE ② support that Philips o ers, register your product Press to select FM, DAB+, or Bluetooth at www.philips.com/support.
Get started Always follow the instructions in this chapter in sequence. Install batteries The batteries can only back up clock and alarm settings. Caution Set time Risk of explosion! Keep the batteries away from heat, sunshine or fire. Never discard batteries in fire. Note Batteries contain chemical substances, so they should be disposed of properly.
4 Listen to DAB+ radio • No DAB+ radio station is stored to presets during this process. • New stations and services will be added in the DAB+ broadcast. To make new DAB+ stations and services available, perform a full scan regularly. Tune to DAB+ radio stations Store DAB+ radio stations Press...
5 Listen to FM radio • Station name • Dynamic Label Segment (DLS) • Signal strength • Program type (PTY) Note • Ensemble Name • Channel and frequency • Keep the clock radio away from other electronic devices • Signal error rate to avoid radio interference.
Store FM radio stations manually Use FM menu In FM tuner mode, press and hold MENU / Note INFO for more than 2 seconds to access the FM menu. • You can store a maximum of 20 FM radio stations. Press to scroll through the menu options:...
AL1 or AL2 to confirm. • The unit exits alarm setting mode when being idle for 15 seconds. » If you fail to search for “Philips R7705” or cannot pair with this unit, press and hold for more than 2 seconds to enter Activate/deactivate alarm timer pairing mode.
Snooze the alarm Wirelessly charge your smartphone When the alarm sounds, press SNOOZE. » The alarm snoozes and repeats ringing 9 minutes later. Put your smartphone on the wireless charging pad, the wireless charging will be activated. » will be displayed. Set sleep timer »...
Product General information information Brand: Philips; Model: AS340-090-AD280; AC Power Input: 100-240V~, 50/60 Hz, (power 1.2A; adaptor*) Output: 9V 2.8A, 25.2W Note *interchangable 3 pins BS 1363-1, 2 pin en 50075 Product information is subject to change without prior notice.
If the problem remains • The Bluetooth function is not enabled on unsolved, go to the Philips webpage (ww.philips. your device. Refer to the user manual of com/support). When you contact Philips, make your device to find out how to enable sure that the device is nearby and the model Bluetooth.
Directive 2014/53/EU. You can find the Declaration of Conformity on www. philips.com/support. This product complies with the radio interference requirements of the European Community. This product is designed and manufactured with high-quality materials and components, which can be recycled and reused.