Operation - Tarmo XTP121 Instruction Manual

4. To adjust deflector higher, slide cable up.
Tighten top nut.
5. Check travel and repeat adjustment as
necessary.
Track Tension (if so equipped)
Over time the track can stretch. If the machining is
pulling to the left when a straight path is desired,
tighten the left track. If the unit is pulling to the right,
tighten the right track. To adjust the tension,
tighten the flange lock nut on the front of track side
plate. This pulls the J bolt attached to the axle and
tightens the tracks.

OPERATION

Freewheeling and Self-Propelling
Left wheel equipped with the axle lock pin can be
completely released by removing the pin and
installing it in the outer axle hole. Unlock the left
wheel to allow for easier turning of the unit.
To unlock the left wheel, remove the pin from the
inner hole and insert the axle pin through the outer
axle hole, but not through the wheel hub.
To lock the left wheel, insert the pin through the
wheel hub and the inner axle hole.