About Hardware's Configuration - TRENDnet TE100-PCI User Manual

Fiber ethernet adapter

Hide thumbs Also See for TE100-PCI:

Table of Contents

About Hardware's Configuration

Step 1:

Choose "View Current Configuration" from the Main Menu and press

<ENTER> to view the adapter's current configuration.

Step 2:

If you want to change the current configuration, choose "Set Up New

Configuration" from the Main Menu and press <ENTER> to proceed.

Step 3:

Choose "Media Type" and press <ENTER>. For the Fiber Adapter, you

can only select [Auto Detect], [100 Full] or [100 Half] from the "Media

Type" selection. The adapter will not function when selecting [10 Full] or

[10 Half].

Step 4:

Choose "Boot ROM Size" and press <ENTER>. Select [Boot Enabled]

or [Boot ROM Disabled]. Note: We do not provide Boot ROM.

Step 5:

Same steps for "Flow Control", "Wake On LAN", "Link Change" and

"LAN Wake Signal": Choose, select, <ENTER>, and <ESC> to exit.

User's Guide

檔名: pcifxp.doc

原作者: Carrie Chen

列印時間: 1/31/2003 3:06 PM

Fiber Ethernet Adapter

Table of Contents

Te100-pcifxplus