Connecting Remote Wake-Up Cable
This is an optional function. Proceed with the installation only
when your PC supports this Remote Wake-Up and you wish to
make use of this function. Please check your Motherboard User's
Guide for more information.
Step 1:
Make sure the power to the PC is off.
Follow Step 1~3 in previous section.
Step 2:
Check if the Fiber Adapter is properly installed in a PCI slot.
Step 3:
Prepare a Remote Wake-Up cable. Connect the cable from Fiber
Adapter to motherboard connector. Refer to Figure 3 below for details.
Step 4:
Replace the PC cover then.
Step 5:
Proceed to "Connecting to Your Network" Section.
Figure 3: Connecting Wake-Up cable
User's Guide
檔名: pcifxp.doc
原作者: Carrie Chen
列印時間: 1/31/2003 3:06 PM
Connec t Re m ote Wa ke -Up c a b le from Fib e r Ad a p te r
to m othe rb oa rd c o nnec to r
Plug in Rem ote Wa ke-Up c a ble
to c onne c tor on Fib er Ad a pte r
Fiber Ethernet Adapter
9