Locking The Controls; Over Temperature Protection - Hoover HIFS954MCTT Instruction Manual

As big zone
1. Touch the slider of the heating zone (left side) that you wish to go into
flexizone, then touch the flex zone selection button to activate the flexible
area as a single big zone, the indicator next key will be on.
2. Touch the slide along the "—" control, or just touch any point of the "—" to
adjust the power level.
As two independent zones
1. If you want to cancel the flex zone, touch the slider of the heating zone again,
then touch the flex zone selection button, the indicator next to the flex zone
button will disappear.

Locking the Controls

• You can lock the controls to prevent unintended use (for example children
accidentally turning the cooking zones on).
• When the controls are locked, all the controls except the ON/OFF control are
disabled.
To lock the controls
Hold the keylock control . The timer indicator will show " Lo ".
To unlock the controls
1. Make sure the Induction hob is turned on.
2. Touch and hold the keylock control for 3 seconds.
3. You can now start using your Induction hob.
When the hob is in the lock mode, all the controls are disable except the ON/OFF
you can always turn the induction hob off with the ON/OFF control in an emergency,
but you shall unlock the hob first in the next operation.
Over-Temperature Protection
A temperature sensor equipped can monitor the temperature inside the Induction
hob. When an excessive temperature is monitored, the Induction hob will stop
operation automatically.
EN-18
,