Vissani QR254 Series Owner's Manual page 14

Installation (continued)
SECURING THE RANGE HOOD TO THE BRACKETS
NOTE:
The following procedure applies to both frame or frameless cabinet
bracket installations.
There are 2 pairs of recessed slots in the front and rear
of the range hood.
Rear (R) slots can be used to hold the range hood
vent and electrical connections.
Front (F) slots are used to hold the range hood in place to
permanently secure it to the cabinet.
Temporarily hang the hood on the rear (R) brackets.
While holding the hood check the electrical and duct
connections.
using the front (F) slots.
QR254 (SERIES)
R
F
Fig. 20
A
Fig. 21
14
R
F
B