Vissani QR254 Series Owner's Manual page 13

Installation (continued)
B.2 FRAMED CABINET BRACKET INSTALLATION
Refer to the marking on brackets to determine their
correct installation side and orientation.
Flat end of the bracket with the arrow should face
towards you and the notched end should face the wall.
Align the bracket against the inside edge of the 30 in
(762 mm) cabinet cabinet frame and the back wall. Mark
the location of 3 holes (out of the available 6 holes) as
Set the bracket aside and drill three 7/64" holes in the
Secure the bracket to the side frame using a screwdriver
and provided 18mm wood screws (AA). If a given
mounting hole instead.
Repeat the above procedure to install the remaining framed
cabinet bracket on the opposite side of the cabinet.
Please contact vissani@conglom.com or 1-888-449-9197
7/64"
13
Fig. 18
Fig. 19-1
Fig. 19-2
AA
Fig. 19-3