Adjusting The Height Of The Upper Basket - Beko BDIS38120A User Manual

Preparation
Adjusting the height of the
upper basket
(depends on model)
Upper basket height adjustment
mechanism is designed so that you can
create wide spaces on the upper or lower
compartment of the machine by adjusting
the basket upwards or downwards either
while it is empty or full.
Thanks to this mechanism, you may use
your basket in three different positions,
namely lower, center or upper positions.
To lower the basket, perform the following
while the basket is at uppermost position;
1. Hold the wires of the upper basket and
raise the handle of the mechanism
upwards as shown in the figure (A).
2. Lower the basket to the next lower
position.
3. Release the basket when it catches on
to the next lower position.
Repeat the same operation if the height is
not adequate.
26 /44 EN
1. To raise the basket, hold the wires of
the basket and pull the basket upwards
with both hands while the basket is at
the lowermost position (B)
2. Release the basket when it catches on
to the next upper position with a "Click"
that may be heard from the right and
left mechanisms.
Repeat the same operation if the height is
not adequate.
C
The movement mechanism
may not function properly if the
upper basket is overloaded or
if the weight distribution is not
balanced. In heavier conditions,
there is the risk of falling one
1
level down.
2
C
Make sure that the adjustment
mechanism has the same
3
positions on the right and left
sides of the upper basket.
Dishwasher / User's Manual
1
2
3