Table of Contents
Advertisement
Preparation
Remove the test
Turn on the tap and
strip from the
let the water run for
packet.
about a minute.
After determining hardness level of the supply water:
1. Pres the settings menu key for 3 seconds to enter the Settings Menu.
C
In some models pressing the Menu key only for once will allow you to enter the
Settings menu.
2. Using <- and +> keys, proceed until the water hardness setting indicator becomes on ("r"
position will be displayed).
3. Using the Selection key, adjust water hardness level according to the hardness of the
supply water. For correct setting please see "Water hardness level setting table".
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
English Water
Level
Hardness °dE
Level 0
0-5
Level 1
6-9
Level 2
10-15
Level 3
16-19
Level 4
20-24
Level 5
25-62
Dishwasher / User's Manual
Hold the test strip in
the water for about
a second.
German Water
French Water
Hardness °dH
Hardness °dF
0-4
0-8
5-7
9-13
8-12
14-22
13-15
23-27
16-19
28-34
20-50
35-90
Remove the test
Wait for 1 minute.
strip from the water
and shake it.
Water Hardness Level Indicator
Press the Selection key to switch the water
hardness level to position 1. (r1)
Press the Selection key to switch the water
hardness level to position 2. (r2)
Press the Selection key to switch the water
hardness level to position 3. (r3)
Press the Selection key to switch the water
hardness level to position 4. (r4)
Press the Selection key to switch the water
hardness level to position 5. (r5)
The test strip shows
you the hardness
level.
13 / 44 EN
Advertisement
Table of Contents
