Beko BDIS38120A User Manual page 33

Operating the product
Tablet detergent function
(depends on model)
Allows to obtain a better drying
performance from the multi-purpose
detergents called as all in one detergents
such as 2in1, 3in1, 4in1, 5in1 and etc.,
depending on the hardness level of the tap
water.
C
If you have used the Tablet
features during the last washing
programme you used, Tablet
function will remain active in
the next washing programme
you will select.
C
Tablet Detergent function may
cause change in the programme
duration.
SelfDry
(Depends on the Model)
Thanks to the "SelfDry" feature on your
machine, the drying effectiveness of your
machine is improved and power is saved.
There are two options, namely "OFF" and
"ON".
You may use sub-menu settings to change
"SelfDry" settings.
When you activate this function, the door
of your machine is opened automatically at
the end of the washing cycle.
C
Auto door opening feature
opens the doors at the end of
the washing cycle thanks to
the "door opening shafts". This
process takes about 2 minutes.
Do not force to close the door if
the power is interrupted while
the shafts are moving out.
Operation shall be completed
and shafts shall be retracted
when the power is restored.
C
SelfDry function may cause
changes to the cycle time.
Dishwasher / User's Manual
Interior Lighting
(depends on the model)
Some models have interior lighting to
illuminate the interior when the door is
opened.
1. After switching on your machine, press
the Settings Menu key for 3 seconds.
C
In some models pressing the
Menu key only for once will
allow you to enter the Settings
menu.
2. Press <- and +> keys to move to the
"L:" position on the display. Select the
position you want with the Selection
key. Interior lighting is off in "L:0"
position and on in "L:1" position.
3. Switch off the machine with the On/
Off key to save the changes.
Changing Warning Sound Volume
1. After switching on your machine, press
the Menu key for 3 seconds.
C
In some models pressing the
Menu key only for once will
allow you to enter the Settings
menu.
2. Press <- and +> keys to move to the
"S:" position on the display.
3. Each pressing on the Selection key will
change the warning sound volume as
"S:0" off, "S:1" medium and "S:2" high.
4 Switch off the machine with the On/
Off key to save the changes.
33 / 44 EN