Installation - Rollei Pro Transmitter Mark IIs Manual

For sony

Table of Contents

Available languages

Installation

2. Updating the firmware: Before you put the device into operation, please

first make a firmware update with the latest firmware, which we have

uploaded for you in our download center at https://downloads .rollei .com/en/

startseite-english . Instructions can be found here on page 46 .

3. Attaching to the camera: Before connecting the trigger to your camera

make sure that both devices are turned off . Then slide the trigger into the

hot shoe of your camera .

4. Power ON / OFF: To turn the trigger on please press Power button for

about 2 seconds . To turn the device off press the Power button again for

about 2 seconds .

ENGLISH

Table of Contents

Do you have a question about the Pro Transmitter Mark IIs and is the answer not in the manual?