TRENDnet TPL-111BR Quick Installation Manual
  1. Manuals
  2. Brands
  3. TRENDnet Manuals
  4. Wireless Router
  5. TPL-111BR - WIRELESS POWERLINE ROUTER 125
  6. Quick installation manual
TRENDnet TPL-111BR Quick Installation Manual

TRENDnet TPL-111BR Quick Installation Manual

Powerline 802.11g wireless router
Hide thumbs Also See for TPL-111BR:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
TPL-111BR
Powerline 802.11g Wireless Router Quick Installation Guide
Guide d'installation rapide du
Routeur Powerline sans fil 11g 54 Mbps
Anleitung zur Schnellinstallation des
Drahtloser 54 MBit/s 11g Powerline-Router
Guía de Instalación Rápida
Enrutador Powerline inalámbrico 11g a 54Mbps
Version 10.30.06
Copyright ©200 .
6 All Rights Reserved.
TRENDware International, Inc.

Advertisement

Table of Contents
loading

Related Manuals for TRENDnet TPL-111BR

Summary of Contents for TRENDnet TPL-111BR

  • Page 1 TPL-111BR Powerline 802.11g Wireless Router Quick Installation Guide Guide d'installation rapide du Routeur Powerline sans fil 11g 54 Mbps Anleitung zur Schnellinstallation des Drahtloser 54 MBit/s 11g Powerline-Router Guía de Instalación Rápida Enrutador Powerline inalámbrico 11g a 54Mbps Version 10.30.06 Copyright ©200 .

  • Page 2: Table Of Contents

    Table of Contents English ... 1 1. Prepare for Installation ... 2. Install Hardware ... 3 Configure your Powerline AP/Router ... 4. Wireless Configuration ... 5. Powerline Configuration ... 6. Configure LAN Settings ... 7. Accessing the Powerline Router ... 8.

  • Page 3: English

    Following the installation instructions should be quick and easy. If you run into problems, please refer to the Troubleshooting section or the more detailed installation procedures on the User's Guide CD-ROM. If you need further technical support, please visit www.TRENDNET.com or call technical support by phone. Verify Package Contents...
  • Page 4 Collect Account Information from Internet Service Provider (ISP) During the installation of your AP/Router, the configuration utility will ask you to specify your ISP connection type. Therefore, please verify your Cable or DSL Internet broadband connection with your ISP and ensure you have all the information for one of the following connection types: Dynamic IP Cable Connection Nothing is required.

  • Page 5: Install Hardware

    2. Install Hardware 1. Connect one RJ-45 network cable from the Cable/DSL Modem's Ethernet port to the WAN port on the Powerline Router. 2. Connect a different RJ-45 network cable from your Powerline Adapter to your computer's network card. 3. Plug the Powerline Adapter into your power outlet. DO NOT plug the Powerline Adapter into a surge protector strip.

  • Page 6: Configure Your Powerline Ap/Router

    3. Configure your Powerline AP/Router The following section will help you configure your AP/Router to connect to the Internet and your PCs. The setup differs and is dependent on the type of Internet connection you have. If you are not sure what type of connection you have, please contact your ISP to obtain the required information, which is listed in the Prepare for Installation section at the beginning of this Quick Installation Guide.
  • Page 7 3. Click WAN. This page will allow you to configure the TPL-111BRP for Internet access. If your ISP requires you to enter a Host Name and Domain Name, please type this information in the appropriate fields. Select your Connection Type from the pull down menu, (DHCP, Static IP, PPPoE, or PPTP) and proceed to the appropriate subset of instructions below.
  • Page 8 Static 6. Select Static as the Connection Type. 7. Enter the IP address, subnet mask, default gateway, and domain name server (DNS) provided by your ISP. 8. Go to step 15. PPPoE 9. Select PPPoE as the Connection Type, and scroll down to the PPPoE section.
  • Page 9 PPTP 12. Select PPTP as the Connection Type, and scroll down to the PPTP section. 13. Enter the PPTP Gateway Address, username, and password provided by your ISP. NOTE: Select Enabled from the PPTP Keep Alive pull-down menu; this is the recommended setting for most users. 14.

  • Page 10: Wireless Configuration

    4. Wireless Configuration 1. Click Wireless. The recommended settings will be automatically selected for you. You may, however, choose to select a different channel and/or network name (SSID). NOTE: You must remember your “network name (SSID),” as you will need it when you configure your wireless network adapter to connect to your access point.
  • Page 11 3. Click Apply (at the bottom of the page). 4. Click Continue. English...

  • Page 12: Powerline Configuration

    5. Powerline Configuration 1. Click Powerline and verify that Home-plug is enabled, and that the TPL- 111BR can detect other Powerline Adapters. You can also change your Powerline password, but be sure that your Powerline Adapters have the same password. Click Apply and click Continue. English...

  • Page 13: Configure Lan Settings

    6. Configure LAN Settings 1. Click LAN, and change the IP Address of your Router to match your current network settings. Press the TAB button on your keyboard to automatically assign the Starting IP and Ending IP Address. Scroll down and click Apply.

  • Page 14: Accessing The Powerline Router

    7. Accessing the Powerline Router Using your Wireless Networking Adapter In this example, the TEW-501PC Super A+G Wireless Utility will connect to the TPL-111BRP. 1. Open the wireless utility that came with your networking adapter and click AP List. 2. Select the SSID that was assigned to TPL-111BRP. Click Connect. English...
  • Page 15 Using Your Powerline Adapter In this example, the TPL-101U's Powerline Utility will connect to the TPL-111BRP. 1. Double-click PLC Configuration Utility on your desktop. 2. Verify the TPL-101U's Link Quality. 3. Verify that the TPL-101U can detect the TPL-111BRP. English...

  • Page 16: Test Your Connection

    3. If the application displays an IP address of “192.168.1.x,” your computer is connected to your access point. 4. Open your web browser, type www.trendnet.com (or another reliable URL) into the address bar, and press the Enter key. If the website appears, your router is successfully connected to the Internet.
  • Page 17 IP address of “192.168.1.x,” your computer is connecting to your access point. 3. Open your web browser, type www.trendnet.com (or another reliable URL) into the address bar, and press Enter. If the website appears, your router is connecting to the Internet.

  • Page 18: Troubleshooting

    WAN section. Click the WAN IP Release button, and then click the WAN IP Renew button. This will allow the AP/Router to refresh the connection with your ISP. Then, try accessing a website such as http://www.trendnet.com with your Internet browser.
  • Page 19 Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.TRENDNET.com TRENDnet Technical Support US Canada Toll Free Telephone: 1(866) 845-3673 24/7 Tech Support Europe (Germany France Italy Spain Switzerland UK) Toll Free Telephone: +00800 60 76 76 67...

Table of Contents