Smart ECO Saving
The
Smart ECO Saving
function reduces power consumption by controlling the electric current used by
the product panel.
― This option is not available when
SAMSUNG
Bright
MAGIC
― This menu is not available when
Eye Saver Mode
―
Game Mode
wil automatically turn off when
•
Off: Deactivate the
Smart ECO Saving
•
On: The power consumption will automatically be reduced by about 10% over the current setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
Off Timer Plus
Configuring Off Timer
Off
Timer: Turn on
Off Timer
mode.
Turn Off
After: The off timer can be set within a range of 1 to 23 hours. The product will automatically
power off after the specified number of hours.
― This option is only available when
Off Timer
― For products for the market in some regions, the
product powers on. This is done in accordance with power supply regulations. If you do not want the timer to
activate, go to
→ System → Off Timer Plus
Configuring Eco Timer
Eco
Timer: Turn on
Eco Timer
mode.
Eco Off
After: The
Eco Timer
can be set between 10 and 180 minutes. The product will automatically
power off after the specified time has elapsed
― This option is only available when
Eco Timer
is in
Dynamic Contrast
mode.
is enabled.
Smart ECO Saving
is enabled.
function.
is set to On.
Off Timer
is set to automatically activate 4 hours after the
and set
Off Timer
to Off.
is set to On.
PC/AV Mode
Set
PC/AV Mode
to AV. The picture size will be enlarged.
This option is useful when you view a movie.
•
Set to
PC
when connected to a PC.
•
Set to
AV
when connected to an AV device.
― Products with a display area of 16:9 or 16:10 are only supported.
― If the product (when set to HDMI/DisplayPort)
Signal
Cable, press the JOG button to display the function-button screen and then select
PC/AV Mode → HDMI → PC
or AV.
Source Detection
Select either
Auto
or
Manual
as the method to recognize input signal.
Key Repeat Time
Control the response rate of a button when the button is pressed.
Acceleration,
1
sec, or
2 sec
can be selected. If
when a button is pressed.
is in power saving mode
or is displaying the message
No Repeat
is selected, a command responds only once
Check
→ System →
34