Table of Contents
Advertisement
Installation
Attaching the Stand
― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
― The exterior may differ depending on the product.
1
Insert the stand neck into the stand base in the
direction shown in the figure. Tightly fasten the
connecting screw at the bottom of the stand base.
- Caution
Do not hold the product upside down only by the
stand.
2
Place the protective Styrofoam (cushion) included
in the package on the floor and place the product
facing down on the Styrofoam, as shown in the
image.
If Styrofoam is unavailable, use a thick sitting mat.
3
Place the stand neck on the display, as shown in the
figure. When you place the stand neck, ensure that
the two guides on the stand neck can be inserted into
the groove of the display. Then press the stand neck
downwards until the raise button on the stand neck
insert into the groove of the display.
4
Stand assembly is complete.
18
Advertisement
Table of Contents
