Table of Contents
Advertisement
User Manual
S*R65*
The colour and the appearance may differ depending on the product, and the specifications are subject to change without prior
notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
© Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Trademarks other than that of Samsung Electronics are owned by their respective owners.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e., where the user manual
has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e., where the user manual has
not been read).
You will be informed of the administration fee amount before a technician visits.
Advertisement
Table of Contents
Related Manuals for Samsung S R65 Series
Summary of Contents for Samsung S R65 Series
- Page 1 © Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Trademarks other than that of Samsung Electronics are owned by their respective owners.
-
Page 2: Table Of Contents
Reverse Side Adjusting the Product Tilt Rotating the Monitor Screen Screen Setup Anti-theft Lock Setup and Reset Precautions for moving the product SAMSUNG MAGIC Bright Installing a Wall-mount Kit or Desktop Stand Self Diagnosis Brightness Installation FreeSync Attaching the Stand... - Page 3 Installing the Software Extended warranty Easy Setting Box Restrictions and Problems with the Installation System Requirements Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center Product diagnosis (Screen issue) Checking the Resolution and Frequency Check the following. Q & A...
-
Page 4: Before Using The Product
Chapter 01 Before Using the Product Securing the Installation Space Safety Precautions Make sure to have enough space for ventilation when placing the product. An internal temperature rise Caution RISK OF ELECTRIC SHOCK DO NOT OPEN may cause fire and damage the product. Maintain enough space around the product as shown in the Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE diagram when installing the product. -
Page 5: Cleaning
Wet a soft cloth in water, wing it out well, and then use the cloth to wipe the exterior of the product • Only use the power cord provided with your product by Samsung. Do not use the power cord with clean. -
Page 6: Installation
‒ The product lifespan may be reduced or a fire may result. ‒ Be sure to consult Samsung Customer Service Center if you want to install the product at such a •... -
Page 7: Operation
There is a high voltage inside the product. Never disassemble, repair or modify the product ‒ Be sure to power off the product and disconnect the power cord when water or other foreign yourself. substances have entered the product. Then contact Samsung Customer Service Center. ‒ Contact Samsung Customer Service Center for repairs. •... - Page 8 Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ‒ Set the screen to power-saving mode or moving-picture screen saver when not using the product for an extended period of time. •...
-
Page 9: Preparations
Chapter 02 Preparations Parts Parts Description Multi directional button that helps navigate. JOG Button ― The JOG button is located on the rear left side of the product. The button can be used to move up, down, left or right, or as Enter. Control Panel This LED is power status indicator and works as ―... -
Page 10: Direct Key Guide
Direct Key guide ― The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes. ― The function buttons page shows if Eye Saver Mode is enabled. -
Page 11: Function Key Guide
JOG button in the function key guide screen. Press to enable or disable Eye Saver Mode The items below are not available if the Eye Saver Mode function is enable. • Picture SAMSUNG Bright, Brightness, Color, Game Mode → MAGIC • System Smart Eco Saving →... - Page 12 When the product displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below. JOG Button Power saving/Non-signal mode Source Change Down PRESS(ENTER) for 2 seconds Power Off When the product displays the menu the JOG Button could be used as below. JOG Button Action UP/DOWN...
-
Page 13: Changing Brightness, Contrast And Sharpness Settings
Set the input volume for the Brightness input device to at least 20% and control the volume using the volume control (JOG button LEFT/RIGHT) on the product. ― This menu is not available when SAMSUNG Bright is set to Dynamic Contrast mode. -
Page 14: Reverse Side
Reverse Side ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connect the power cord for your monitor to the POWER IN port on the back of the product. Connects to a PC using a USB cable. -
Page 15: Adjusting The Product Tilt
Adjusting the Product Tilt Rotating the Monitor Screen ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without ― You can rotate your monitor as shown below. notice to improve quality. ―... -
Page 16: Anti-Theft Lock
Anti-theft Lock Precautions for moving the product ― An anti-theft lock allows you to use the product securely even in public places. ― Power the product off and remove the power cable from the power socket. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. -
Page 17: Installing A Wall-Mount Kit Or Desktop Stand
‒ Samsung shall not be held liable for any product damage or personal injury caused by using a wall-mount kit other than the one specified or from an attempt to install the wall-mount kit on your own. -
Page 18: Installation
Installation Attaching the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― The exterior may differ depending on the product. Insert the stand neck into the stand base in the Place the protective Styrofoam (cushion) included Place the stand neck on the display, as shown in the Stand assembly is complete. -
Page 19: Removing The Stand
Removing the Stand ― Before removing the stand from the product, place the product on a flat and stable surface with the screen facing down. ― The exterior may differ depending on the product. Place the product on a clean and flat floor as shown Lift the stand neck in the arrow direction to detach Unfasten the connecting screw at the bottom of the in the figure. -
Page 20: Connecting And Using A Source Device
Chapter 03 Connecting and Using a Source Device Read below before installing the monitor. Connecting and Using a PC 1 Before installing the product, check the shapes of both ports of the supplied signal cables and the Select a connection method suitable for your PC. shapes and locations of the ports on the product and external device. -
Page 21: Connection Using The Hdmi Cable
Connection Using the HDMI Cable Connection Using the DP Cable First make sure that the power cables for product and other devices (e.g. PC, settop box, etc.) First make sure that the power cables for product and other devices (e.g. PC, settop box, etc.) are removed. -
Page 22: Connecting The Product To A Pc As A Usb Hub
Connecting the Product to a PC as a USB HUB Utilizing the Product as a USB HUB Using the product as a hub, connect and use various source devices with the product at the same time. A PC cannot connect to multiple source devices at the same time as it has a limited number of input/ Connecting a USB device output ports available. -
Page 23: Connecting The Power
― To detect and start a USB device faster, connect the device to the USB 3.0 port on the product. The read/ Connecting the Power write will be affected by the USB device and your PC. ― The product does not support media play. If you need to play a file in your USB device, please connect the product as a Hub to your PC and play the file on your PC. -
Page 24: Tidying Up The Connected Cables
Tidying Up the Connected Cables Stand assembly is complete. Rotate the machine to the highest vertical position. Connect the corresponding cables. Open the COVER-STAND NECK RIGHT, Place the corresponding cables into the stand-neck holder. Cover the COVER-STAND NECK RIGHT. and rotate the open part at the bottom. Do not stretch the line. -
Page 25: Correct Posture To Use The Product
Driver Installation ― You can set the optimum resolution and frequency for this product by installing the corresponding drivers. ― To install the latest version of the product driver, download it from the Samsung Electronics website at http://www.samsung.com. Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. -
Page 26: Screen Setup
Custom: Customize the contrast and brightness as required. • Standard: Obtain a picture quality suitable for editing documents or using Internet. SAMSUNG MAGIC Bright • Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content. -
Page 27: Brightness
You can adjust the general brightness of the picture. (Range: 0~100) Adjust the tint of the screen. ― This menu is not available when A higher value will make the picture appear brighter. SAMSUNG Bright is set to Cinema Dynamic Contrast mode. -
Page 28: Hdmi Black Level
HDMI Black Level Game Mode If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/ Configure the product screen settings for game mode. colour degradation, black level, etc.) may occur, depending on the connected source device. In such case, Use this feature when playing games on a PC or when a game console such as PlayStation™... -
Page 29: Picture Size
Picture Size Screen Adjustment ― This menu is available in Change the picture size. Analog mode only. ― This menu is only available when ― This option is not available when Picture Size is set to Screen Fit Mode. FreeSync is enabled.. -
Page 30: Adjusting Osd (On Screen Display) Settings
Chapter 05 Adjusting OSD (On Screen Display) settings Function Key Guide → → On Screen Display A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The colour and shape of parts may differ Position from what is shown. -
Page 31: Setup And Reset
Chapter 06 Setup and Reset Function Key Guide → → System A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The colour and shape of parts may differ Select when the following screen is prompted. - Page 32 If you need to see the photo again, click Show Again. Show Again • You will see the following screen when you select Yes. Self Diagnosis Complete Contact the Samsung Call Center for assistance. Please have the following information ready: ‐ Model Code: ************** ‐ S/N: ************** •...
-
Page 33: Freesync
• The sound quality of the product may be degraded. ― If you encounter any issues when using the function, contact the Samsung Service Centre. ― When the resolution is changed while setting FreeSync Standard Engine... -
Page 34: Smart Eco Saving
PC/AV Mode to AV. The picture size will be enlarged. the product panel. This option is useful when you view a movie. ― This option is not available when SAMSUNG Bright is in Dynamic Contrast mode. •... -
Page 35: Power Led On
Power LED On Configure the settings to enable or disable the power LED located at the lower part of the product. • Working: The power LED is on when the product is turned on. • Stand-by: The power LED is on when the product is turned off. Reset All Return all the settings for the product to the default factory settings. -
Page 36: Information
Chapter 07 Information Function Key Guide → → Information A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. -
Page 37: Installing The Software
At least 60MB of free space on the hard disk drive • Windows 8.1 32Bit/64Bit Easy Setting Box enables users to use the monitor by partitioning multiple sections. To install the latest version of Easy Setting Box, download it from the Samsung Electronics website at • Windows 10 32Bit/64Bit http://www.samsung.com. -
Page 38: Troubleshooting Guide
Check the following. Customer Service Center Installation issue (PC mode) ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked. - Page 39 The message Check Signal Cable appears. Text is blurry. Check that the cable is properly connected to the product. If using a Windows OS (e.g. Windows 7, Windows 8, Windows 8.1 or Windows 10): Go to Control Panel → Fonts → Adjust ClearType text and change Turn on ClearType. Check that the device connected to the product is powered on.
-
Page 40: Q & A
Q & A ― Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. • Windows 7: Go to Control Panel → Appearance and Personalization → Display → Screen Resolution → Advanced settings → Monitor, and adjust Refresh rate under Monitor settings. •... -
Page 41: Specifications
Chapter 10 Specifications General Model Name S24R650FD*/S24R652FD*/S24R654FD* S27R650FD*/S27R652FD*/S27R654FD* Size 24 Class (23.8 Inches / 60.4 cm) 27 Class (27.0 Inches / 68.6 cm) Display area 527.04 mm (H) x 296.46 mm (V) 597.888 mm (H) x 336.314 mm (V) 20.7 Inches (H) x 11.7 Inches (V) 23.5 Inches (H) x 13.2 Inches (V) Pixel Pitch 0.2745 mm (H) x 0.2745 mm (V) - Page 42 ― The above specifications are subject to change without notice to improve quality. ― This device is a Class B digital apparatus. ― For detailed device specifications, visit the Samsung Electronics website. (USA only) Dispose unwanted electronics through an approved recycler.
-
Page 43: Standard Signal Mode Table
Standard Signal Mode Table Model Name S24R650FD*/ S24R652FD*/S24R654FD*/ S27R650FD*/ S27R652FD*/ S27R654FD* Synchronization Horizontal Frequency 30 – 81 kHz Vertical Frequency 56 – 75 Hz (VGA) 50 – 75 Hz (HDMI/DP) Resolution Optimum Resolution 1920 x 1080 @ 60 Hz (D-SUB) 1920 x 1080 @ 75 Hz (HDMI, DP) Maximum Resolution 1920 x 1080 @ 60 Hz (D-SUB) - Page 44 Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA DMT, 1152 x 864 67.500 75.000 108.000 VESA DMT, 1280 x 720 45.000 60.000 74.250 VESA DMT, 1280 x 800 49.702 59.810 83.500 VESA DMT, 1280 x 1024 63.981 60.020 108.000...
- Page 45 Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA DMT, 1280 x 1024 79.976 75.025 135.000 VESA DMT, 1440 x 900 55.935 59.887 106.500 VESA DMT, 1600 x 900 RB 60.000 60.000 108.000 VESA DMT, 1680 x 1050 65.290 59.954 146.250...
-
Page 46: Appendix
• Use of supplies or separatly sold product unspecified by Samsung. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Not a product defect Electronics Co., Ltd. • Remodeling or repairing the product by customer. -
Page 47: Extended Warranty
Samsung guarantee that replacement parts will be available for 5 years after the end of production. After 5 years, in the event that the Samsung’s service center has run out of replacement parts and cannot repair the product, Samsung will replace your product at no additional charge. If the model you...