Programming - Ecosoft FK1252CEMIXA Instruction Manual

INSTRUCTION MANUAL ECOSOFT
22

4. PROGRAMMING

4.1. CE, CI, CE Twin control valve setup
(
FK, FU, FK Twin, FU Twin systems
After installing and powering up an Ecosoft FU or FK system, enter display language, water
hardness, current time, and regeneration options in the Installer menu of control valve.
Use ▲ and ▼ buttons to change setting; NEXT button to save and go to next step; CLOCK
to save and exit menu; REGEN to move back one step;
To proceed,
simultaneously for 3 seconds.
Language menu will show up. Select display
language. This menu entry is only accessible in CE
valves.
Enter hardness of influent water. Milliequivalent per
liter is the default hardness unit.
Refer to control valve manual to change to a different
unit (only accessible in CE valves).
If the control valve is equipped with internal hard
water mixing valve, there will be Service Hardness
entry (hardness of the mixed product water) after
influent water hardness.
Set Day Override (maximum number of days in
service, after which control valve will carry out
preventive regeneration). 14 days is recommended.
Set the preferred time of delayed regeneration,
hours then minutes (factory set to 2 AM).
MEDIA SYSTEMS
®
hold NEXT and
)
▲ buttons