Hardware Requirement List - TRENDnet TEW-212APBO Quick Installation Manual

Wi-fi inter-building router

Hide thumbs Also See for TEW-212APBO:

Table of Contents

TEW-212APBO Quick Installation Guide

2. HARDWARE REQUIREMENT LIST

When setting up the TEW-212APBO inter-building router, you will need the

following:

• TEW-212APBO Inter-Building Router

• Mount kit

• TEW-212APBO Router CD with documentation

Additional Requirement

• A computer connected to the same network as the router.

• Straight-through CAT 5 Ethernet cable with RJ-45 connectors for connecting the

router to the network and an inline power source (maximum 100 meter).

• The following information is needed from your network system administrator:

− The wireless Service Set Identifier (SSID) for your radio network. This

parameter is case-sensitive.

− A unique IP address for the router (for example: 192.168.2.123), if it will not

be connected to a network with a DHCP server.

− A default gateway and subnet mask if the router is not on the same subnet as

your PC.

• E110 Power over Ethernet (PoE) One Port Hub.

Table of Contents