Table of Contents
Advertisement
TEW-212APBO Quick Installation Guide
By enabling the L2 separation feature, the clients would be unable to communicate
between themselves.
You may desire an additional measure of security on your wireless network, which
can be achieved by using WEP (Wired Equivalent Privacy) encryption. TEW-
212APBO offers 64/128 bit WEP securities on wireless transmissions. Encryption
keys are represented by five (for 64 bit WEP) or thirteen (for 128 bit WEP) pairs of
hexadecimal digits, separated by colons (e.g. A 64 bit WEP key may look like:
01:23:45:67:89). WEP encrypts each frame transmitted from the radio using one of
the keys entered from this table.
Click on the "Save settings" button to save and finish configuring TEW-212APBO.
Redirection Service
After clicking on the "Save settings" button to end the configuration process, a
waiting and redirection message should appear as shown below.
Waiting and redirection message
It indicates the browser will be redirected to new site (new IP address). If the new site
belongs to a different subnet (e.g., from 192.168.2.218 to 168.20.1.10), the redirection
function will not work. The IP address of the locally connected computer should be
changed to the same subnet as the new site (168.20.1.x) before re-clicking the
redirection message above or re-entering the new IP address of TEW-212APBO into
the URL field of a browser, the new site should re-connect.
If the new site belongs to the same subnet as the old site (i.e. in the same 192.168.2.x
network), and the redirection function did not redirect to the IP address automatically,
please re-click the redirection message or press the refresh button in the browser.
Your router should now be up and running. Consult the User's guide on the CD for a
description of the router system management functions and the instructions to access
the Help guide.
16
Advertisement
Table of Contents
