ART 7W/G+/48 IP G+ 1. SYSTEM OPERATION 1.1 Call reception: When receiving a call the monitor starts beeping displaying on the screen who is trying to communicate with the house. The monitor will automatically take a snapshot so that if the call is not answered, you can check who the caller was.
IP G+ ART 7W/G+/48 2. HOME SCREEN Date and time 16-03-2020 11:24 Status leds Settings Intercom Events Settings Quick access icons (*)Call the guard unit (*)Request the lift (*)Enable/Disable “Do Not Disturb” (*)Enable staircase light (*)Arm/Disarm alarms (Alarms code: 9999)
Page 5
ART 7W/G+/48 IP G+ These are defined in detail below: Missed calls, shows the log of unanswered incoming calls: (*) Logs can be deleted individually or collectively. Individual deletion, press , select the logs to be deleted Llamadas perdidas confirm deletion...
IP G+ ART 7W/G+/48 3.4. Messages: Displays received messages and allows the sending. Mensajes *Alarm message Messages The symbol indicates that it is an alarm message. Recorded 01851 Concierge 03-09-2020 10:40 IMPORTANT: When receiving an alarm message, the monitor will alert of...
ART 7W/G+/48 IP G+ A progress bar will start and after brief moments the confirmation of send will be obtained. 01001 Welcome to the block Succesfully sent Progress bar Confirmation 4. SETTINGS Settings. The settings section provides the following options:...
IP G+ ART 7W/G+/48 Screen. Screen Enable/disable key press confirmation sound Touch screen beep When “Do not disturb” mode is enabled. Screen off while do not disturb Active screen allows to see who makes the call. When screen is off we will not be disturbed by the bright given off by the monitor.
Page 9
ART 7W/G+/48 IP G+ long press (keep pressing until se armed countdown) will arm the alarm. 16-03-2020 11:24 View Intercom Events Settings Alarm is to be armed Arming the alarm. After the end of the countdown, it will confirm the arming Long press.
IP G+ ART 7W/G+/48 Password Contraseña The default password to access the alarm settings is 9999. It is possible to set a different one from the password menu: **** Password Enter new password IMPORTANT: In case of modify the password keep in mind the new one.
Need help?
Do you have a question about the ART 7W/G+/48 and is the answer not in the manual?
Questions and answers