Advertisement
ASDisplay Install Guide
The ASDisplay, is a control and monitor display designed to show the current information about your battery and connected
loads. It displays tanks level, battery level, (dis)charging state, battery chemistry, and available power source in the system. In
addition, ASDisplay controls the pumps operation (up to 2x pumps). You can also put the system into ECO mode using the
"ECO" button.
1. Mounting
1.
Mount the ASDisplay to the wall with screws.
2.
A wall cut-out (as shown above) must be
routed/cut prior to wall installation.
3.
Screws with a max diameter of 4mm must be
used for mounting.
3. Wiring Diagram
2. Connecting the ASDisplay
Connect the ASDisplay to the ASPower using
the included CAN Bus cable.
4. Description
1.
Water Tank Levels
2.
& 3. Pump Buttons
4.
ECO Mode Button
5.
Power Button
6.
Power Source LED
7.
Charging/Discharging Status LED
8.
Battery Chemistry LED
9.
Battery Level LED
DOC PART 038625
TEAM
BMPRO
.COM
REV 1.0
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BMPRO ASDisplay
Summary of Contents for BMPRO ASDisplay
- Page 1 It displays tanks level, battery level, (dis)charging state, battery chemistry, and available power source in the system. In addition, ASDisplay controls the pumps operation (up to 2x pumps). You can also put the system into ECO mode using the "ECO"...
- Page 2 Also included is the ASDisplay, an information display designed to show you with current information about your battery and connected loads, including the battery level of the connected battery, the charging/discharging state, battery chemistry, active power sources.
Need help?
Do you have a question about the ASDisplay and is the answer not in the manual?
Questions and answers