Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BMPRO TrailCheck
Summary of Contents for BMPRO TrailCheck
- Page 1 OWNER’S MANUAL TrailCheck TEAMBMPRO.COM...
- Page 2 To learn more about the BMPRO range of products, please visit our website teambmpro.com TEAM BMPRO...
-
Page 3: Table Of Contents
TrailCheck Status Indicator SERVICING SPECIFICATIONS WARRANTY TERMS AND CONDITIONS Designed by BMPRO, one of Australia’s leading power solution experts, the BMPRO range of MANUAL PART 034614 products are proudly Australian-Made in Melbourne, Victoria and represent a high-quality REV 1.0 product that will provide years of service. -
Page 4: About Trailcheck
With the wireless TrailCheck, some location options may provide a more reliable connection. If a suitable location can’t be found, a wired remote is required. TrailCheck can be mounted with the provided Velcro strips and plugs into a 15A (or lower) fused vehicle 12VDC accessory socket. Ensure the TrailCheck will not dislodge during severe braking. -
Page 5: Pairing The Trailcheck To The Trailsafe Series
Apply the hook Velcro to the TrailCheck on the side to be attached to the vehicle by peeling off the clear tape. Similarly attach the loop side Velcro to the vehicle where it will be mounted so that the tapes will align. -
Page 6: Trailcheck Status Indicator
House battery capacity sufficient for 15mins of emergency braking operation TrailSafe / TrailSafe If necessary, check TrailSafe / TrailSafe+ TrailCheck standby or no power by depressing brake. Check if TrailCheck connected to power source. House battery may have Check battery to ensure at least 10Ah house insufficient capacity for 15mins battery capacity available. - Page 7 Pull pin out when Put pull pin back in; wait for 1 minute or power calibration starts cycle unit to restart calibration. TrailCheck not receiving signal Check TrailSafe / TrailSafe+ by depressing brake from TrailSafe / TrailSafe in the last 20 mins TrailCheck –...
- Page 8 The indicators below are also available only for TrailSafe+ when used with SwayControl STATUS CONDITION SOLUTION Battery good for 15mins operation and SwayControl in normal operation Sway event active Battery may have insufficient capacity 1. Check battery to ensure over 10Ah for 15 mins of braking operation or battery capacity available.
-
Page 9: Servicing
SERVICING Do not attempt to service the TrailCheck yourself or dismantle, modify or repair the TrailCheck yourself; this will void your warranty. If your TrailCheck requires servicing, please consult your BMPRO dealer or visit teambmpro.com for assistance. SPECIFICATIONS TRAILCHECK SPECIFICATIONS Communications Bluetooth Low Energy (BLE 5.0) -
Page 10: Warranty Terms And Conditions
7. BMPRO will not be liable for any costs, charges or expenses incurred in the process of returning a product in order to initiate a warranty claim. - Page 12 BMPRO TEAM +61 3 9763 0962 sales@teambmpro.com BMPRO 19 Henderson Rd, Knoxfield VIC 3180 Australia .COM teambmpro.com...
Need help?
Do you have a question about the TrailCheck and is the answer not in the manual?
Questions and answers