Installation - Electrolux ELTE7600AT Use & Care Manual

Unpacking the Laundry
Center
CAUTION
EXCESSIVE WEIGHT HAZARD
It is best for two people to work as a team to
move or lift the laundry center to avoid injury.
WARNING
Do not allow the unit to fall when tipping
to remove packing materials.
IMPORTANT
Save the foam base and shipping plug to
help prevent damage during any future
moves.
1. Tape dryer
and washer
doors closed.
A person must
stand in front
and rear of unit.
Tilt unit forward.
Front person
must hold
unit while rear
person removes Styrofoam support
from underneath the interior of the
washing machine.
2. Return unit
to original
position.
3. The people in
front and rear
of the unit must
hold the base
pad in place
while walking
the unit towards
the rear of the
Styrofoam pad
until both rear
feet of the unit are firm on the ground.

INSTALLATION

4. Maintaining a
hold the unit
at all times,
tilt backward
so the bottom
rear of the unit
contacts the
floor. Have the
rear person
hold unit while
the person in front person removes the
Styrofoam pad from underneath the
unit.
5. Tilt unit forward
to standing
position on
floor.
IMPORTANT
• DO NOT place the laundry center onto its
back without the shipping bolts.
• DO NOT tip washer upside down onto
its top or right side for any reason.
IMPORTANT
Failure to remove shipping hardware
completely could result in damage to
the appliance, damage to your home, or
unexpected washing results.
Save all shipping bolts and spacers
for future use. If the washer is to be
transported at a later date, the shipping
hardware must be reinstalled to help
prevent shipping damage
21