Installation; Use - Electrolux EWW9024P5SB User Manual

Table of Contents

Advertisement

Available languages

Available languages

6
www.electrolux.com
• Under no circumstances should you
attempt to repair the machine yourself.
Repairs carried out by inexperienced
persons may cause injury or serious
malfunctioning.
Contact your local Service Center.
Always insist on genuine spare parts.

1.4 Installation

• This appliance is heavy. Care should
be taken when moving it.
• When unpacking the appliance, check
that it is not damaged. If in doubt,
do not use it and contact the Service
Center.
• All packing and transit bolts must be
removed before use. Serious damage
can occur to the product and to
property if this is not adhered to. See
relevant section in the user manual.
• After having installed the appliance,
check that it is not standing on the inlet
and drain hose and the worktop is not
pressing the electrical supply cable.
• If the appliance is installed on a
carpeted floor, please adjust the feet in
order to allow air to circulate freely.
• Always be sure, that there is no
water leakage from hoses and their
connections after the installation.
• Any plumbing work required to install
this appliance should be carried out by
a qualified plumber.
• Any electrical work required to install
this appliance should be carried out by
a qualified electrician.
May cause electric shock! if the
machine is not connected to an
earthed/ground system. DO NOT
touch the wet clothes and metal
parts.
For safety reasons do not use
double adapters, extension cords
and multi-plug adapters.

1.5 Use

• Only wash fabrics which are designed
to be machine washed.
Follow the instructions on each
garment label.
• Do not overload the appliance. See the
relevant section in the user manual.
• Before washing, ensure that all
pockets are empty and buttons and
zips are fastened. Avoid washing
frayed or torn articles and treat stains
such as paint, ink, rust, and grass
before washing.
• Garments which have been in contact
with volatile petroleum products should
not be machine washed. If volatile
cleaning fluids are used, care should
be taken to ensure that the fluid is
removed from the garment before
placing in the machine.
• Never pull the power supply cable
to remove the plug from the socket;
always take hold of the plug itself.
• Never use the Washer-Dryer if the
power supply cable, the control panel,
the working surface or the base are
damaged so that the inside of the
Washer-Dryer is accessible.
• As some duvets and eiderdowns
should be washed/dried in large
commercial machine because of
their bulk, please check with the
manufacturer of the item before
washing/drying in a domestic machine.
• The users should always check that
they have not left their gas lighters
(disposable or otherwise) in their
clothing.

Advertisement

Table of Contents
loading

Table of Contents