Diagnosing Led Indicators - TRENDnet TEG-S081Fi User Manual

8-port 100base-fx layer 2 managed switch with gbic slot

Hide thumbs Also See for TEG-S081Fi:

Table of Contents

Diagnosing LED Indicators

The Switch can be easily monitored through panel indicators to assist

in identifying problems, which describes common problems you may

encounter and where you can find possible solutions.

IF the power indicator does not turn on when the power cord is

plugged in, you may have a problem with power outlet, or power cord.

However, if the Switch powers off after running for a while, check for

loose power connections, power losses or surges at power outlet. IF

you still cannot resolve the problem, contact your local dealer for

assistance.

Cabling

100Base-FX fiber port: For multi-mode Fiber connector type must use

50/125 or 62.5/125 um multi-mode fiber cable. You can connect two

devices over a 2 kilometer distance.

Table of Contents