Midea B5 Operation & Instruction Manual page 5

02
. 取下滚刷、滚刷盖板并清洁，根据拆解步骤装回即可。
Remove the brushroll and brushroll cover to clean, and assemble it in accordance
with the disassembling steps.
b
Caution
注意
1. 拆卸锁扣以及滚刷前，一定要关闭机器，并拔下电源插头；
2. 当灰尘堵塞住地刷风道时，请使用一次性筷子等去除；
3. 除了滚刷和滚刷盖外，其余均不能水洗；
4. 请勿给除螨毛刷的两端上油；
5. 运行过程中请勿触摸地刷底部电动毛刷等，或者整机出风口附近。
1. Before disassembling the lock catch and brushroll, be sure to turn off the machine and unplug
the power plug.
2. When the brush duct is blocked by dust, clear with disposable chopsticks.
3. Except roller brush and the brush cap, no part can be washed with water.
4. Do not apply oil on both ends of the mite brush.
5. Ensure filter is correctly secured during assembly.
6. Do not touch the electric brush in the bottom or the outlet of the device in the running process.
8
a
紫外线灯清洁
为了使紫外线灯管有较好的除螨效果，
请定期擦拭清洗。
用十字螺丝刀卸下紫外线灯盖板螺钉，取下紫外线灯盖板，用干毛巾轻轻擦拭紫外线灯表面即可；
清理完毕后，按照拆分相反顺序组装即可。
Remove the screws in UV lamp cover with a cross screwdriver, and gently wipe the surface of the
UV lamp with a dry towel after removing the UV lamp cover. after finishing the cleaning, assemble
it in accordance with the reverse order of disassembling.
Caution
注意
1. 在清理紫外线灯前，一定要关闭机器，并拔下电源插头。
1. Before cleaning the UV lamp, make sure to turn off the machine and unplug the power plug.
UV lamp cleaning
In order to make the UV lamp with the better mite-eliminating
effect, please regularly clean and wipe.
紫外线灯管
UV lamp tube
a
紫外线灯盖板
UV lamp cover
b
毛巾擦拭
Wipe with a towel
9