Related Manuals for Unfinished Furniture of Wilmington SAN REMO C-10
Summary of Contents for Unfinished Furniture of Wilmington SAN REMO C-10
- Page 1 ASSEMBLY INSTRUCTIONS : SAN REMO SLATBACK CHAIR / DESK CHAIR Description : C-10 Item No. ITEM NO.: C-10 Printed in Vietnam REVISED JUL 4, 2012 - 1 -...
- Page 2 BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased.
- Page 3 HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: Description Sketch Description Sketch Short bolt Medium bolt (M6x40mm) (M6x60mm) Flat washer Long bolt (M6x80mm) (6.5x19mm) Screw...
- Page 4 STEP 2 Attach front legs (D) to the seat frame with bolts (2), washers (4) and (7). Tighten with allen key (6). Place side stretchers (C) between front and back legs. Attach stretchers with the screws (5) as shown below. Tighten with a screwdriver. STEP 3 Attach the seat (E) to top of the seat frame (from Step 2) with screws (5) as shown below.