Trap Setting
The Trap Setting enables the device to monitor the Trap through the
Web Management Utility, set the Trap IP Address of the manager
where the trap to be sent.
System Events: Monitoring the system's trap.
u
Device Bootup: a trap when booting up the system.
Illegal Login: a trap when there is a wrong password login, and it
will record from where the IP was been login.
Fiber Port Events: Monitoring the Fiber port status.
u
Link Up/Link Down: a trap when there is linking status happens in
fiber port.
Abnormal* Receive Error: to send a trap when there are receive
data error in fiber port.
Abnormal* Transmit Error: to send a trap when there are
transmit data error in fiber port.
Figure 23. Trap Setting
29